We have 3 static IP addresses assigned by the ISP (Cox cable in Oklahoma City, OK). We are using the Linksys Cable Modem/Router provided by Cox. I have two servers that need to be connected ...
I am trying to set up a VPN to my Windows 2003 Domain Controller. I tried using the RRA but when I did that is seemed to deny everyone access to that domain controller. Is there a way to set ...
I am trying to configure 2 new VPN tunnels through my asa 5505. I currently have 1 vpn tunnel that is working correctly. These tunnels are with the exact same corporate IT group. When I con...
I have an L2TP VPN connect into our network using certificates (not smart cards) for authentication.
I would like to use this connection for remote users to log into the network; however, w...
Hi folks. Let me preface by saying that I am a Cisco novice (read: know almost nothing) and yet I have been tasked with making the VPN work. I did not configure the PIX. The problem is that...
I am working on setting up a site to site vpn using a L2TP connection.
I am getting an error whenever i try to connect post configuration.
The L2TP connection attempt failed because th...
I recently set up a windows 2003 server with RRAS enabled. I want 3 or 4 people to VPN into or network.
My PIX is set up to do NAT. I set the PIX to "forward" tcp port 1723 as well as ip "G...
I configured two different new Cisco ASA5505 firewalls at two different unrelated locations, each with it's own static IP. I needed to configure a VPN on each firewall, each hosting its own s...
Is it possible to configure Site to Site VPN in Cisco 3560 switches?
We have recently setup SSL VPN with Secure Desktop, Advanced Endpoint Assessment, and using the Cisco AnyConnect VPN Client. While connected with the client we are not able to access the inte...
I am able to connect to my vpn at home but i can not connect to the internet.
I have a new Dell Optiplex 330 running Windows Vista Business that I tried to install the SonicWall GlobalVPN client ver 4.0 this afternoon. During the install it asked for the IP address of ...
The Remote Access Wizard asks me for a domain name (see attached file). We do not have a registered domain name. We do, however, have a public IP, which is what I entered in place of a domain ...
Remote clients are receving error 736 when attempting connect thru client VPN (with PPTP). I am running ISA 2006 and am using AD for authentication directly (not RADIUS at this point). The sof...
I have a win2k3 server behind an Rv042 router and I just want my field technicans to be able to upload files to a share on the server. I have 50 techs in the field that will not be uploading a...
We have a customer with three phyiscally separate sites on 3 different subnets.
At the minute if someone vpn's in to the main site they have no access to the other sites through the vpn.(secu...
I cannot copy a file any larger than 100kb from an external client (windows 2000, xp and/or vista) to the VPN and Web server(server 2003) via vpn. I can copy very small ones. When I copy larg...
I am going to China this summer. I'd like a cheap VPN that gives me complete encryption for all web browsing. What is an inexpensive VPN service that I can install for a few months?
Also, w...
I have a Client to site VPN setup with Small business server 2003 standard edtion. And I need to keep the excisting setup add a site to site VPN connect tion to another SBS server. I have a ...
Can someone help me download the Cisco VPN client for a new laptop that we just purchased. It comes with windows vista ultimate and our subscription to Cisco has been expired.
Reagrds
I'm using Vista Home Basic to VPN into a PIX device using PPTP. It works on XP Pro but I get a 828 reason code failure in the event log. It would seem to indicate that it is timing out althou...
We have our main office on the east coast and a satellite office on the west coast. The people on the west coast connect to our Exchange sever through Sonicwall netextender. After signing in...
I just established a tunnel between a Cisco VPN Concentrator (At the main office) and a Cisco ASA 5510 (Remote location)
On the ASDM of the ASA 5510 it shows "VPN Tunnels, IKE 1 and IP Sec1...
Using New Network Connection, I created a VPN connection to a Windows Server hosting SQL Server at a remote IP address. The status shows connected and I can see several thousand bytes have be...
everything goes ok until the end when i get TCP/IP 733
