do i need a router that supports VPN? I am using a Belkin F5D8233-4 and i can't get my vpn to work.
I have a windows xp pc with 2 nic's, 1 on current lan, 1 on priv testing lan
rpd enabled on this pc, nic1 on 192.168.1.x lan, nic2 on 192.168.10.x
from within the same lan, 192.168.0.x, I ca...
I have to setup a RV042 to do a router to router VPN outside a larger network. Maybe this isn't the right description.
My client has a private network in his office (192.168.50.x). He is ge...
Hi. I need to set up an environment that our branch offices can connect to our central office in California for an accounting software called SBT. Currently there are 7 workstations that conne...
Hi
I am not sure what affects the speed of the VPN commection - but basically i want to make mine faster. We have an office in Delhi India, Sydney Australia plus we have agents that 'trav...
I have connect a remote office in a different state to the main office. The main office currently has a Sonicwall TZ170 for it's firewall. The remote office doesn't have anything yet. What wou...
Hi all,
I've had 2 DG834 routers connected to each other via a VPN tunnel. They both have static ip addresses
and are both acting as vpn end points connecting two networks. This has been u...
I have Netgear VPN Firewall Router FVS124G.
It has a VPN link to 2 other routers.
For about a week ago now the vpn log shows:
TUE JUN 17 15:25:50 2008 INFO :: Sending phase-I notify of t...
I have an SBS 2003 box behind a Sonicwall TZ 170. The client has a branch office that has users logging in locally then connecting over VPN (Windows client) back to HQ and its not very efficie...
Hi,
I have a cisco 1750 router, running 12.3 IOS advanced security.
I need to setup a IPSEC remote access vpn so that clients can dial in to the office.
They will be using the cisco vpn...
Hi,
I have a cisco 1750 router, running 12.3 IOS advanced security.
I need to setup a IPSEC remote access vpn so that clients can dial in to the office.
They will be using the cisco vpn...
I have bought a new modem (D-Link 320T) to replace the existing modem (D-Link 300T) as I was having intermittent disconnection issues with it. Since replacing the modem none of our remote acce...
I have 2 domain controllers that are members of the same domain.
Each is in a different IP Subnet seperated by firewalls and the internet.
I have reasonably high speed connections betwee...
I have a Cisco 501 Cisco PIX Firewall
Version 6.2(2)
Cisco PIX Device Manager Version 1.0(2)
At the present I have a Cisco VPN set up between two offices. I need to be able to allow my s...
Afternoon,
I am currently dealing with a **** of an ISP who wont do what i am asking with our managed pix service
I am after an example set of code where a PIX passes through authenticat...
I have setup SSL VPN on our ASA5520 and can successfully establish a VPN connection, but I am unable to pass traffic to/from the VPN client and the internal network. Below is a copy of my con...
Background:
Long ago we set up our DHCP to use the range 192.168.0.X. It seemed a good thing at the time. The problem is, however, that all the broadband routers use the same addressing sch...
i need some suggestions on these two rivals.
what i have:
just a cisco 2801 router.
what i need:
VPN, FIREWALL, NAT and some kind of Proxy to monitor users web activity (so that they ...
I am using the Cisco vpn client and am getting the following errors when trying to connect to a vpn server:
1 16:21:36.909 09/12/07 Sev=Warning/2 CVPND/0xA3400011
Error -14 sending ...
CDW did not send the exact router I requested so I have some questions that hopefully one of experts can answer for me! I have a cisco 1841 with the AIM-VPN/SSL-1. This allows WebVPN, but will...
I need to share a database file between two locations. I set up ike sec tunnel between two netopia routers and i can ping the computers on each side of network but i can't see files. I am us...
Hey everyone!
I am attempting to setup a new VPN tunnel between an ASA 55xx and a Juniper Netscreen. I have the VPN tunnel working properly, and the IP's routing between the VPN subnets (10...
Could someone provide configuration assistance on how to set up Cisco Works to log VPN client connections from Cisco concentrator. Is there a way that I can log every vpn connection made usin...
How would I write a vbscript to connect to a vpn connection. I tried using rasdial but this automatically connetcs and I want some kind of dialog pop up showing the status of the connection.
Dear All,
We have two subnet which are 192.168.6.0/24 and 192.168.4.0/24 we have vpn connection between them i setup sbs 2003 prem. for 192.168.6.0/24 and i want to add 192.168.4.0/24 sub...
