We have a Cisco VPN Concentrator 3002.
I started working at my company with a tunnel already in place for a remote location.
The way it was setup is with a group called "Base group"
...
I have 2 IP addresses running to my home.
One IP I have going to a PC/Router running server Windows Server 2008. (PC1)
The other IP I have going to another PC/Router running Windows Vist...
The issue is with Lionclock timeclock software and it's ability to broadcast over the 255.255.255.255 subnet via Routing and remote access VPN connections to the Lionclock clients.
This probl...
Using New Network Connection, I created a VPN connection to a Windows Server hosting SQL Server at a remote IP address. The status shows connected and I can see several thousand bytes have be...
Hi
I am not sure what affects the speed of the VPN commection - but basically i want to make mine faster. We have an office in Delhi India, Sydney Australia plus we have agents that 'trav...
I have been configuring a site to site VPN using a cisco router (with the help of some experst on EE)
I now have the vpn tunnel functioning and stable, the networks are also routing fine. ...
Setting up a small SOHO w/ a PIX 501. Currently I have no ACLS for inside (I'm relying on the default all inside allowed out). I have setup some ACL's from Outside to in w/ some static rule...
Hi there,...My company has a remote office in the UK where several PCs VPN into the main Small Business Server 2003 here at head office in Ireland..They are technically a seperate company and ...
Hi,
What is the difference between Client for dial up access and Client for VPN access.
Regards
Sharath
hI,
Setting up a DMZ (Internet-ASA-DMZ-ASA-LAN) as we are looking allow external access. (The DMZ will only host an SMTP relay server and some mail content inspection boxes at this point.)
U...
i came in to work this weekend to move the DHCP server to another server in the network. It was successfull. now the reason I mention this is because the next day the issue i need help figurin...
I am trying to create a very basic PPTP VPN to allow remote access to a domain. I have set it up, and it seems to be connecting but is not authenticating the user. I only have one NIC in the...
I have been trying to set up a simple VPN connection on my home net work so that I can access it from my lap top, have read neumerous articles relating to this problem and Have set up a Incomi...
I currently have a computer in a remote office in the U.S connecting via a VPN tunnel using the Cisco VPN client software to a server in the UK.
I need 2 more computers in the same office i...
Hello,
I am experiencing a problem with a Sonicwall Pro 1260 with the Enhanced operating system. I have spent lots of time with Sonicwall support with no resolution other then them blaming ...
I'm trying to configure a PIX506E to accept incoming connections from remote VPN users, using the Windows Network and Dial-up Connections. I'm not referring to static IPSEC Tunnels; those are...
Hello,
Please can someone explain how one could configure their own MPLS network? At the moment we have about 20 sites connected via BT IP Clear and I'm wondering if we were to move this sa...
Hi,
I get the 619 error on a second pc whenever I try to connect. If I disconnect one user the other goes through perfectly. Problem is both cannot be connected at the same time.
Router Li...
Had a problem with GRE pass through on a Linksys BEFSR41 for a PPTP link. All the pass though options were turned on and port 1723 was forwarded to the VPN server.
However, the VPN server (W...
I have spent about 30 hours total on the phone with Linksys and with AT&T trying to figure this out and I am sure that someone has run accross it before.
I have an office in Cleveland that ...
SBS 2003 standard. The ISP provides hardware PPTP VPN. The VPN client can ping any computers in the remote site by name or IP, but net view \\IP receives System error 53 - The network path was...
I am unable to find the cd that came with my VPN/Firewall router. I have looked on the netgear site and have not been able to find a downloadable version of the Prosafe VPN Client. Does anyo...
Hi,
I have a client in the financial field with a small office (six PCs) who wants to have one off-site acssociate using an on-site software package. I have built and installed a "server" f...
I have a customer with servers in Conn. and SC (both of which are on different subnets. They are connected together by a vpn. We are trying to setup a simple windows vpn so that they can acces...
My company just upgraded to Exchange Server 2007. Our PC support guy set my laptop up so I could access Exchange Server via Outlook 2003 and VPN. It worked beatifully for a week. Then, I start...
