Well I guess I was asking for it, trying to propose cheaper solutions to clients, so as not to purchase a pix or 1711 or similar. But it's come back to bite me, big time.
Basically I have ...
This one is driving me nuts...
I've installed a 4 point VPN network at a clients car dealership. For this we used four LinkSys RV082 VPN routers. The VPN tunnels are up and running and we a...
I have an office that is using a 2wire 1701hg with a linksys rv042 connected to it. The rv042 has a fixed public ip address. My office consists of a couple xp pro computers in a workgroup envi...
We have a Cisco PIX 506e firewall, and I have set it up so that users can use the Cisco VPN client (ver 4.8) to make a VPN connection to the firewall and access the internal network. It works ...
Hello, I have a Pix 501 connected to a second Pix 501 with a pre-shared-key setup basic (config below).
I want to add a remote office with 2 IPs that are in the 192.168.1.x address space and ...
Here is my gear:
SBS 2003 Server:
Netgear FVS114 Router with latest firmware of 1.01_1
1 remote office
3 or 4 mobile exec's via laptops or at home using their linksys routers (Don't wan...
hi all,
I have a Cisco PIX 501 at an office that users connect to when they're at home. They are all using the Microsoft VPN client/software built-in to Windows XP Pro.
I went through the s...
I am trying to remove the Cisco VPN client R4.01 from my machine to reinstall it. The client has ceased to function since I joined my computer to a SBS2003 domain. I believe what happened is...
Can someone tell me how a Cisco VPN 3000 Concentrator needs to be configured so that when the user puts in their Active Directory credential via Cisco VPn client - the concentrator then checks...
I have a site-to-site VPN tunnel between Office A and Office B via two Cisco Pix firewalls that performs beautifully. The problem is with Office C that connects with Office B via private T1. ...
Hi Experts,
I am new to VPN.
I was told that one of my customers have a PPTP vpn set up.
I have the Ip address and user name and password.
How do I access it thru a browser
Thank You...
Hello,
I am trying to create a VPN between two Netgear DG834G routers, with SBS2003 (standard) on the one side. SBS2003 is set up with two NIC's, acting as a firewall. The VPN is set up c...
Hello experts,
I am a little stumped and dont know if this will work. I have five office locations interconnected in a complete VPN mesh. The main HQ has a 515E and the other 4 offices...
Had a problem with GRE pass through on a Linksys BEFSR41 for a PPTP link. All the pass though options were turned on and port 1723 was forwarded to the VPN server.
However, the VPN server (W...
I have a remote branch office which has a site-to-site vpn tunnel to the main office between 2 Cisco PIXes.
The tunnel was created and I am able to ping from one end to the other fine. I c...
I try to establish a VPN by using the Connect to Small Business Server VPN Client. When I have a free Internet access without any Firewall it works without problems. But when I try to establis...
Can someone set me on the right track? I want to have employees be able to VPN into the office server to retrieve files.
I have a windows 2003 small business server with a sonicwall router....
I have spent about 30 hours total on the phone with Linksys and with AT&T trying to figure this out and I am sure that someone has run accross it before.
I have an office in Cleveland that ...
Hello,
Ive been trying to around 3 days to establish a site to site VPN first from a Cisco 837 router to our new ASA5510 and when that didnt work out, now from to a test PIX 501 6.3. The ...
SBS 2003 standard. The ISP provides hardware PPTP VPN. The VPN client can ping any computers in the remote site by name or IP, but net view \\IP receives System error 53 - The network path was...
Hi, Im having problems setting up my Prosafe VPN Firewall. Currently I use a Netgear 632 on modem mode and have enabled passthrough so that the Netgear Prosafe FVG318 uses PPoE and all the ISP...
I have a NetScreen - 5XP the software version is 2.6.0r1.4. It is configured and working find for normal operations. I have a Microsoft VPN Server behind this firewall. (I do not want to us...
Does anyone have a "simple" step by step instruction on setting up a VPN on a Cisco PIX 515e firewall so remote Windows user can connect to the network. The PIX has ver. 2 PDM. I have tried ...
I have configured a Cisco PIX 501 for VPN access. Clients can connect, but are not able to reach network resources. I originally did the config via CLI, but switch to using the Wizard, as I th...
Hi,
Any one solve my this VPN problem on the window 2003 server.
Event Type: Error
Event Source: RemoteAccess
Event Category: None
Event ID: 20111
Date: 2/19/2007
Time: 6:07:33 AM...
