The following is our current network infrastructure:
Client PCs > SBS 2003 DC (with DHCP & 2 NICs - one internal on 10.xxx.xxx.xxx and one external to the SonicWall on 192.xxx.xxx.xxx) > Soni...
I setup the Cisco ASA 5505 with the VPN wizard and while it connects from the outside it causes the clients to loose DNS and will not allow them to connect to the server or drive shares. Here ...
I'm purchasing a Cisco ASA 5505 Series and have a few questions for anyone that has used/purchased before. See the link here for product info (http://www.cisco.com/en/US/products/ps6120/prod_...
I have successfully been able to set up a VPN connection with my WRT54GL using DD-WRT v.24. From a remote location I am able to access the LAN, sort of. What I want to be able to do is brows...
Hi,
We have an Exchange 2007 Server with SP1 running in a domain. The clients (mostly XP Pro) are running Outlook 2007. They are not using Exchange Casched Mode due to the organizational pol...
Running Outlook 2007 on Vista Ultimate (64 bit) laptop. Using VPN to connect to the office. SBS 2003 exchange server. Laptop worked up until about a week ago connecting to the server over V...
I work at a large university and bought a Linksys RVO42 router to create a small network off our WAN for a protected network of audio control processors. The max number of users would be 2 go...
I have two domains, both at seperate locations. Location 2 connects to Location 1 using a VPN. I have Win 2000 AD servers at both locations. Location 1 houses our MS Exchange 2000 server. ...
I have a Cisco AnyConnect VPN Client that autenticate the user but after a while it raise a "Unable to establish VPN". I'm able to connect to the same asa 5505 through webvpn anyconnect link.
Hi Experts,
This may be a slightly long winded question, but I want to make sure I include all the necessary info.
I am trying to set up a virtual LAN which is only accessible via a VPN ...
I have a CISCO ASA5505 set up for Remote Access VPN, both IPSEC and L2TP. I can access the device just fine using the CISCO VPN client but want to have the option to do so using a Windows clie...
We're based in California and have a Firebox III/700 firewall, with about 10 VPN users, and I'm one of them. VPN connections seem to work great until now. Everyone's connection works except fo...
Hi
I am having a Site to Site VPN error using the following devices
Device : ASA 5510 on my site
Device : Cisco Router 2811 on remote site
Errors I got from ASA 5510 my log fil...
Experts,
I have an ASA 5510 that I have set up for SSL VPN using an internal web server for RADIUS authentication. Currently to access the VPN, a user types in HTTPS://IP ADDRESS:PORT#
Since...
Right now I have four sites - one main location and 3 remote offices. Two of the remote offices are connected via point to point T1 lines and the third has no connectivity back to the main si...
I have Netscreen Remote VPN client installed. I am able to establish a VPN connection. However, I am not able to resolve the hostname or hostname.company.com. I am able to ping the internal...
I am setting up Remote VPN on two Cisco ASA 5505 firewalls. I am able to connect to the firewall through VPN but cannot ping or talk to the inside firewall or network. Please advise. Attach...
Domain users connecting to a Windows SBS 2003 using Microsoft embeded VPN (Windows Vista) can not access shares, other network resources or the internet.
I can ping the SBS server but not a...
Hello- here at our office we just set up a VPN connection. We are running an exchange server with windows server 2003 on it and outlook 2003 clients. When i'm at home using Outlook client ov...
I need help setting up a VPN Tunnel on a Cisco 1841 Router. I tried using the SDM software, but have had no luck. I am running the most current IOS (12.4) Any assistance would be greatly ap...
I have a ZOOM X6 wireless modem/router. I hook up a wireless laptop and the laptop sees the wifi. However, when I try to use a VPN connection, the internet connection is severed. Only when ...
Hello,
I've got RAS set up for VPN connections for outside sales reps to connect to our network. This tends to work without issue most of the time. But oddly, when no settings have been cha...
Hi!
I have a office laptop with outlook and a VPN client so that I can connect remotely and update outlook.
I have just bought a very small computer (UMPC) that I want to use during my vacat...
We've got an urgent problem. We've got two sites, each with a T1 to the internet. The main site has about 200 network devices hooked up to it, multiple subnets, wireless bridges linking some...
I'm trying to connect to a client's network through the Cisco VPN Client which they sent along with the configuration file. My network is behind a Linksys router. I have 2 XP machines (deskto...
