Hi,
I have on one end a Linksys WRVS4400N connected to a Linksys AM200 ADSL Modem and on the other end a Linksys RV082 connected to a cable modem.
The cable modem and RV082 end is workin...
SBS2003 VPN WAS WORKING FINE - THEN IT STOPPED
ERROR 800: UNABLE TO ESABLISH A VPN CONNECTION
WE HAVE PORTS 1723 & GRE 47 OPEN ON THE FIREWALL - WE HAVE TRIED DIFFERENT FIREWALL BOXES. T...
I am working on setting up a VPN connection into our network. I went through the VPN wizard setup in the ASDM. I downloaded the VPN client version 5.0.01.0600 for Windows Vista and setup my co...
Hello,
I'm having troubles setting up a VPN Server on a Windows XP Pro machine. I have the machine that is setup to act as the VPN server with a static IP address of 192.168.1.99 I also h...
Hey experts,
I am using Cisco VPN Client, and I am getting an idle timeout for one of the connections (it's getting disconnected after a certain amount of time being idle); any idea how t...
I have recently set up a network connecting 3 physical locations (1 location has servers, other 2 locations have only workstations and VoIP phones) using SonicWall TZ190 units as border router...
I just build a new Vista Laptop and when running my VPN client I sometimes get a blue screen. This only happens when using the VPN, system works fine otherwise.
Thanks in advance for any hel...
Hi,
I have attached the diagram. I am trying to creat ipsec vpn between the netscreen and cisco router. Can you please tell me if I can do this? Is my diagram conceptually correct?
Is ip add...
I'm having a heck of a time figuring out how to connect the two together...
Senario:
XP Pro w/ Linkaya VPN client ---> nat router ---> comcast cable modem---> internet
internet---> spri...
We have 1 Domanin Controller, MS Server 2008 Standard. We need to set up VPN for remote users, but I don't see Routing and Remote access anywhere on this new platform. Am I missing something...
Hello,
I am working on a Juniper firewall that keeps giving me an error in a VPN connection:
2009-03-25 15:10:57 info IKE<209.142.131.163> Phase 2 msg ID <af69ca06>: Negotiations have f...
I installed the newest Cisco VPN Client (5.0.01.0600) on a PC with Vista.
if I want to connect to our Cisco VPN i get the Message:
Secure VPN Connection terminated by the Client.
Reason 412...
Hi. can any expert tell me how to configure port forwarding for netgear dg834gt. I need to allow for PCAnywhere application to work. At the same time how do i configure port forwarding to allo...
Hi,
I am having problems connecting to the office network. I have a windows XP Home Edition laptop with SP2.
The VPN connection was working fine 3 days ago and previously but not now....
I am trying to get an XP client to connect via VPN to the Netgear FVS338, has anyone had any luck? I can't get the connection to establish. I did manage to get two gateway connections to work ...
I have head office and remote office. I use MPLS as my primary connection and I want to setup the backup VPN connection to the remote office. The netwwork diagram is below.
...
Hi Experts,
We have two offices connected through VPN (bandwidth 1 MBPS), i would like to have video conference through VPN to our other office.
Could anybody advise me any free software...
I have an old cpu that I am running Ubuntu Server on. I am currently using Samba to act as a file server for a central location for files. Because I have not been able to invest in more stor...
I am looking for a cisco vpn client to install on my nokia 5800 xpressmusic.
We've got an urgent problem. We've got two sites, each with a T1 to the internet. The main site has about 200 network devices hooked up to it, multiple subnets, wireless bridges linking some...
I have a linksys RV082 VPN server sat behind a router. The server works for PPTP VPN connections, with UDP port 1723 forwarded, and GRE forwarded. For L2TP VPN connections, I have UDP ports ...
I cannot start the Check Point VPN-1 Securemote service (SR_service), error 1075 appears.
I think I have gone through every screen on the sonic wall but I can't find the pre-shared key so I can connect with a VPN client.. I guess I may have missed it or I don't know?
I took over...
Hi there!
Question is following - what is the easiest(free) way to install a certificate on ASA 5505? I want to use certificate authentication, when connecting to RA tunnel(using Cisco VPN ...
I would like to setup a Sonicwall GLOBAL VPN CLIENT for a macbook but I don't think they are compatible. Is there a VPN Client software for Sonicwall that is compatible with MAC ?
Thank you
