Okay, I'm trying to set up a VPN between home and my work office, so I can work remotely.
My home setup is a wireless network using the Netgear DG834G ADSL modem/router as my gateway. Inter...
Hi all,
I cannot resolve host names over my Windows 2000 Server PPTP VPN connection.
I can ping all hosts by IP Address, but pings by netbios hostname and FQDN's fail.
I can connec...
At work we have an SBS2003 Server which is used by a handful of remote access users, 2 of whom run LAN to LAN VPNs (not that I think that is especailly relevant).
I have been trying to conn...
I have a site to site VPN tunnel setup between an ASA5505 and SonicWall Pro 4060.
The tunnel won't setup and I am getting an odd set of errors (different from the ones I am used to).
This i...
Macbook pro, running 10.4.11 have done all the updates
Trying to install cisco vpn software. Keep getting that error 51. Did try to do a solution , found one online that would restart the v...
Has anyone had a great deal of experience with an FVS338? I have read the manual in and out but i am still having problems.
My problems are:
* I connect the FVS338 to an ADSL Modem/Router....
I had initally setup the PIX 501 for several users to gain access to the office network their home desktops. It worked fine when I tested each user by connecting and logging in to the PIX. Th...
Hi,
We are getting following error while connecting to ASA 5510 firewall using Mozilla web browser.
The installer was not able to start the Cisco SSL VPN Client.
Please contact your IT ...
Dear all,
I am having issues with my Cisco ASA 5505 for more than a month and it has been quite frustrating. I am trying to implement SSL-VPN client on ASA 5505 and when I perform a test p...
I am fairly familiar with these devices, but I use the ASA's ASDM pretty exclusively for setting up them up. My problem is that the VPN wizard is hit or miss at best. Lately I'm running into ...
There is immediate requirement to setup Site-to-Site VPN from our head office to branch using ADSL dynamic IP and for that we have planned to procure below hardware, i would like to know that ...
I'm having a problem where some users connecting from home with ADSL and VPN are losing their VPN connection after 12-15 minutes. In Event viewer on the Coms server it just says that 'the reas...
We have a client with a laptop in an untrusted domain who is running Windows XP Professional SP2. We have established a site-to-site VPN tunnel between the client's company and our own. We n...
i have a cisco asa5505 connected to my cable internet with a dynamic IP address. I'd like to setup a site-to-site VPN from my office (with a static address) to my ASA. I have a dyndns accoun...
Client is Windows XP/Pro connecting on VPN (PPTP) to SBS2000 server. Authentication is with Active Domain Remote access. I have 5 or 6 users connecting from home using the Windows VPN client,...
I just set up my Windows XP Pro box to accept incoming VPN connections. How do I configure my linksys WRT54GL running DD-WRT to allow external VPN connections to connect to this machine? I ass...
This maintenance weekend I configured Cisco AnyConnect VPN to accomidate to our 64bit clients. Unfortunately there is a security flaw and I am not quite sure if there are any other methods to ...
We have an ASA 5510 in which both hardware IPsec and Client IPsec connections terminate.
I have trying to setup same interface security and hairpinning to allow VPN clients connectivity to ...
I get these error messages after installing Cisco VPN client 4.6.
After reboot:
Validation failed for C:\WINDOWS\system32\vsdata.dll
WhenI try to launch the VPN client:
Error 51:IPC so...
I cannot connect to my sbs2k3 vpn server from the internet through my linksys rv042 router. I have forwarded port 1723 and enabled pptp forwarding, but when I try to connect, I get an error 8...
Hi all, I am looking for a sample vbscript to create a PPTP-VPN connection, with specific config parameters. I do not want a user to go through the wizard, just run the script and it sets up t...
Hello experts,
I'm unable to VPN into a SonicWALL TZ100 behind a Netopia 3347 DSL router. I have configured the Netopia to be in bridge mode and entered the PPPOE username and password on ...
Hallo,
Actually my problem was good described in the
http://www.experts-exchange.com/Networking/Broadband/VPN/Q_20922615.html
thread. Unfortunately the solution at the end (to upgrade...
I have two domains, both at seperate locations. Location 2 connects to Location 1 using a VPN. I have Win 2000 AD servers at both locations. Location 1 houses our MS Exchange 2000 server. ...
Hi,
I use Cisco VPN client to connect to a remote system from my corporate LAN.
In My LAN I get a local IP address (10.40.a.b); the whole LAN is natted outside with a single IP addess (194...
