I am connecting to an ASA55109Ver7.0(5) using the Cisco VPN client version 5.0.03.0530. I am able to authenticate and I get an IP address. I can also see that my remote network is listed under...
I have already asked this question, but due to the amount of time waiting for Netgear, I closed the call here.
So here goes again.
I have three laptops, 1 x XP OS, running SPK 3, 1 x Vist...
Hi
I want to setup microsoft VPN client to allow users to connect to business network. I know I can use the buildt in cisco vpn client in the firewall, but this is very complex to me. Can a...
HI there
Was just wondering if it is possible to set up a tunnel vpn connection between a linksys wrv200 and server 2003 configured as a RRAS server?
I have configured a remote access VPN connection on a Cisco ASA 5505 using the VPN wizard in the ASDM. I can establish a connection using Cisco VPN client but once connected, I cannot access o...
I am looking at SSL VPN and would like to know what the expert recommend. I would like to replace the existing Cisco VPN 3000. The Cisco 3000 still work well for the XP users, but Vista x64 ...
We have a small business and purchased a Dell Poweredge server running SBS 2003. I had Geek Squad config Remote Access via a statice IP address provided by a DNS. The first time I connected to...
Hi,
We have 8 nurseries who each have VPN access to HO office. Each site has a software Sonicwall connection through the Sonicwall TZ170 at HO.
This allows them access to a shared drive and ...
I have Netscreen Remote VPN client installed. I am able to establish a VPN connection. However, I am not able to resolve the hostname or hostname.company.com. I am able to ping the internal...
Hi,
I have two locations connected by a router to router vpn connection between a zyxel prestige 600 series router (location1) and a zyxel zywall (location 2). This connection serves an i....
PPTP ports are suddenly missing from RRAS. PPTP clients cannot connect. Have already disabled & reconfigured RRAS on server. PPPoE and L2TP will display. Have gone into port configuration & ma...
Just a simple question...
I have a pc (pc1) that is hard wired to a Netgear FVS318 VPN router that is connected between a dsl modem and a Netgear wireless router that is working fine.
Th...
Hi all,
I cannot resolve host names over my Windows 2000 Server PPTP VPN connection.
I can ping all hosts by IP Address, but pings by netbios hostname and FQDN's fail.
I can connec...
I have a PIX 501 with a new software version that I need to configure as a VPN. What would my configuration need to look like?
Thx
BBanis2K
Hello,
I need to assign a client a static IP address when they log in via their Cisco VPN client. I understand that MAC address based assignments will not work via Cisco VPN Concentrator....
I need to block Hamachi! I dislike this program very much because I can't block it! I have reason to block it so I blocked ports 12975, 32976, 17771 that the LogMeIn site stated it used and it...
I need to allow clients on the inside to access Microsoft servers on the outside and browsed through EE looking for help. I upgraded our 515 to 6.3(3), added "fixup protocol pptp 1723", but I'...
We are setting up Point-to-point VPN tunnels to remote offices using DSL lines with SonicWall TZ180s at the remote locations. These are connecting to a ISA 2004 firewall running on a windows ...
I have a user that can not access our VPN server. We are just using a Windows 2003 server with routing and remote access. All users connect with PPTP VPN. Our router is a linksys RV082 with...
Hi
I am just about to move into a new flat, which is serviced by BellSouth. I want to be able to VPN into my home network from remote locations such as Interent Cafes etc.
I am having a...
Hi,
I try to setup easy-vpn-server on a cisco877 router via sdm. The only configuration I done on router manually is the adsl and a few port forward of internal PC to wan interface. Af...
Ok, here's one for the experts. It is the generic "error 412 The peer is no longer responding" which is misleading becasue it has never successfully connected.
Windows 2000
Cisco VPN Client ...
Hi Experts,
Let me take a minute to describe my network. I have two Windows 2003 servers, one is an Exchange 2003 server and the other is a Domain Controller. All computers on the network...
I m trying execute the comand "crypto isakmp invalid-spi-recovery" on my cisco router 2600 version 12.3(22a).
In Cisco IOS Security Command Reference, Command History is writed: This command...
I have a windows 2003 network, with a mix of 2003 and 2000 domain controllers, there are branch offices connected to the lan via a VPN, recently this vpn was upgraded from Pick boxes to Cisco ...
