I've followed basic procedures to put sysprep files on our Virtual Center machine.
I'm creating a 64-Bit Windows 2003 R2 Template, and have intalled the OS onto a virtual machine (before conv...
HP has advised us to install HPSIM (System Insight Manager) on a Windows
box. We're told if HPSIM is able to connect to our VMWare ESX via Snmp or
DMI or WBEM, we're able to port this Windo...
I just set up VMware ESX server 3.5 on a test server with a Dell MD1000 direct attached storage system. IT is attached to a dell perc 6 raid controller card. The ESX server OS is loaded on the...
hi,
Are you able to store VM's on SATA drives with ESX 3.5.
i.e Can you VMDK (i think thats the extention) reside on sata drives.
I know that this was not possible in previous versions, b...
This is my first try with ESX and I can't figure out what is going on. I have Dell PE1800 with a SCSI controller for the Tape Drive and a CERC 6 Channel raid card. There are two 250GB HD i...
I have VM server installed on my Vista computer. All of a sudden when I click on VM server it asks for Host Name, User and password. It must of been doing that automatically becuase I never ...
Hi there,
I'm trying to setup a websense server on a vmware ESX 3.5. I did the machine already, but i can't see any traffic. I have a Dell PE 2850, 2 NIC - NIc 1 connected on the normal netw...
we have an ESX 3i host that has an external 1tb USB drive setup as a VMFS datastore, but this was done by another admin and I think during initial setup, I am trying to add a 1tb USB volume to...
Our ESX3.5 server runs on a RAID10 array of 8 disks. We had a two-drive failure over the weekend. I have completed the rebuild, however we are still experiencing many problems with our VMs.
...
I have used VMWare Converter to successfully convert older (Acronis 9.1 era) tib files to a ready to run VM for VMWare Server. However, it doesn't recognize the newer ATIEW 9.5 tib files. I've...
Hi. I'm installing VMWare on a single server that has two QLogic HBAs attached to a HP MSA 1000 SAN. This is the only server that will be connected to the SAN.
I've created a LUN to store m...
hi all,
i want to configure database server (sql 2005 on windows server 2003)on vm and access it throgh all client machine on my physical network. can any one tell me the whole network seeti...
To All,
I'm running VMware ESX 3.5 and my disk is 540 GB and I'm running out of disk space. I would like to add more hard drive to my RAID 5, if I do this will it wipe-out my data? or it wi...
I am integrating NLB with our ESX servers. We have two sites - one node is connected with a cisco 6509 (primary) and the other has a cisco 3550 (DR site). when the one connected to the 3550 ...
Hi,
I've followed the link below describing how to install SCO OpenServer 6.0 on ESX 3.5 but I'm unable to connect it to the network. Does anyone have any tips re. the network configuration...
Hi,
I'm looking to create a Windows XP Embedded Test/Staging environment on VMware. I haven't been able to find any solid, specific instructions on how to do so. Any ideas?
We have attached one of the ESX server's physical NICs to a Cisco SPAN Destination port. We want to set up a virtual Windows machine to run WireShark and capture the traffic on the Cisco SPAN ...
I am trying to create a test enviroment using VM server.
I have installed and configured vm server onto a standalone workstation and created new server vm's, loaded MS server 2K3 and run dc...
Hello,
I have used VCB as a tool for doing backup using the follow command: vcbmounter.
It's all ok but I have some warning message like this:
[2008-08-01 10:26:36.422 'App' 4460...
I have installed Untangle in bridge mode on an ESX server which has 2 physical NICs installed.
NIC 1 is setup as external in Untanlgle and is connected directly to the firewall.
NIC 2 is ...
Hi a Vmware image was unresponsive i.e. couldn't rdp console or even through Vmware itself. so I powered off the image and powered back on and got "the following file is missing or corrupt sys...
I have a Dell PowerEdge 2900III. I just created a new Vm and inserted my windows 2003 into my vmware server. When I power on the vm it goes right to trying to boot from the network and never t...
We recently installed a VMware ESX environment. We were going to migrate our first SQL server today to the VMware environment. We have heard that it was a good idea to use the VMware Converte...
How can I use Fedora 9 for VMware Workstation host OS? I downloaded v6.0.4 which installed fine but vmware-config.pl cannot find the C header files matching my running kernel [/usr/src/linux/i...
Hello,
I have a XP Pro guest machine running under the SCSI HD type in Fusion. Due to the specific requirements of an application, the Windows "Enable write caching on disk" setting must ...
