moo_c_o_w
asked on
vmware vsphere esxi 5.5 - 5.5 update 1 esxcli
Hi All,
I have made an SSH connection to my esxi 5.5 host. I have uploaded update-from-esxi5.5-5.5_up date01.zip to datastore2. After running the command -
esxcli software vib install -d /vmfs/volumes/datastore2/u pdate-from -esxi5.5-5 .5_update0 1.zip
After running, it states -
Installation Result
Message: Host is not changed
Reboot Required: false
VIBs Installed:
VIBs Removed:
VIBs Skipped: [lists many VIBs]
What's happening here ? I can't confirm this, but is it due to the fact that it is an evaluation license ?
Thanks
esxcli-VIB.JPG
I have made an SSH connection to my esxi 5.5 host. I have uploaded update-from-esxi5.5-5.5_up
esxcli software vib install -d /vmfs/volumes/datastore2/u
After running, it states -
Installation Result
Message: Host is not changed
Reboot Required: false
VIBs Installed:
VIBs Removed:
VIBs Skipped: [lists many VIBs]
What's happening here ? I can't confirm this, but is it due to the fact that it is an evaluation license ?
Thanks
esxcli-VIB.JPG
ASKER
I saw your articles Hancock. I followed something similar, but obviously will have to try the real deal.
Just to confirm -
trial license no issue ?
will maintenance mode make it 'fail' the way it did ?
Will try and let you know. Thanks again.
Just to confirm -
trial license no issue ?
will maintenance mode make it 'fail' the way it did ?
Will try and let you know. Thanks again.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Hancock... I'm awarding points because I had overlooked maintenance mode [a requirement for VUM... so it was silly to overlook esxcli]. However, I believe the reason why all VIB's skipped was because the host was already patched. Build 1623387 is 5.5 U1.
Just wanted to update everyone to carefully check current build.
Thanks for you prompt reply.
Just wanted to update everyone to carefully check current build.
Thanks for you prompt reply.
Make sure you use the correct patch for Heartbleed!
and do not use 5.5 U1 with NFS!
and do not use 5.5 U1 with NFS!
ASKER
Fun times for VMware. No doubt.
and all the other vendors also with products affected!
HOW TO: Upgrade from VMware vSphere Hypervisor ESXi 5.1 to VMware vSphere Hypervisor ESXi 5.5 for FREE
It's the same process for an upgrade!
Did you put the ESXi Host into maintenance mode?
you could also try
esxcli software vib update