E3719 Unable to write to media (media=<media name>, EC=Error Daemon not initialised)
i use robocopy to perform data backups at night. for the most part, the backups are successful. however, there are a few instances of the following error in the log file:
Older ...
Hello,
I am about two purchase two external Dell RD1000 removable disk drives to backup two different servers. I am looking for advice on which backup software I should buy bundled with th...
Hi-
A few questions:
1) Whose technology is HP using to create the factory installed recovery image on the HP_RECOVER partition?
2) How can I replace the image(s) on that recovery partition...
We have a NetBackup 6.5.1A server, sharing a robotic library having 4 LTO4 tape drives with 2 other media servers. All of a sudden the master server can only see now 3 drives, while all four o...
My Husband, Mom and Dad cannot function using Windows VISTA. What's even worse for them is Microsoft Office 2007 which looks and feels so so different from MS Office 2002 and 2003. So while ...
Hello Expert,
I was working on a lengthy word file on my computer. I was saving and opening it only from a jump drive. I have misplaced the jump drive somewhere. I would like to know whether ...
I am running Vista X64 Ultimate with Acronis 11 True Image Home Build 8,053.
My system started to become a little unstable, I think as the result of the updating of some drivers, so I decid...
I have a HP Proliant ML370 G3 server running Windows SBS 2003 SP2, with CA Brightstor ARCserve r11.5 SP3 for SBS and an internal HP DAT 72 SCSI tape drive. However, the tape drive appears offl...
I am in the process of migrating a customer's server over to new hardware. After hearing good things about Symantec Backup Exec 11d I installed a trial version, performed a full backup and cre...
Hi,
I have installed Windows 2008 Server for testing and I have also installed Netbackup Client software on the server, when i try to do a system state backup of Windows 2008 server , it erro...
Event ID 21 Source VOLSNAP - the flush and hold operation for volume was aboreted because of low system memory. Error occurs when snapshot runs, note also that this is an Exchange 2003 box.
I am finding it very difficult to find good documentation for Networker 7.4.
We have Networker 7.4 running daily backups connected to 100 tape library. Sometimes one of the backups fail an...
Hi,
I have a HP MSL 6000 using an E1200 Network storage router, connected to a fibre switch with my dl380 g4.
I can see both the tape library and tape drive in the device manager. In Arc...
What is the best way to back up CIFS Shares from a netapp Filer. I basically want to pull the data off the netapp and store it on another storage device(non netapp) for onsite backup.
...
I am trying to setup my backups using NTBackup (I find HPs software cumbersome at best) and the backups are not running. When I run the backup I get the following error in the log file, "Cann...
I just finished attempting a restore from my Maxtor One Touch III MIni.
I have used this on my laptop since last fall and have been religious about performing backups every 2nd or 3rd day bec...
Hi,
I am trying to find an alternative to Robocopy, currently we are backing up our smaller branch offices to our main sites using Robocopy overnight, this is fine however with so many log ...
Hi there, we have an IBM 3581 LTO 2 tape drive connected to a Windows Server 2003 (Integrated Netfinity card attached to an IBM iSeries).
I can see the tape drive under RSM and I can see th...
here is the problem.
we are running a server for VOIP. it's a raid-1 and support tell us that we should have build that server with a raid 10.
here is what I would like to do:
ghost the...
I have setup a Policy to backup to a standalone drive attached to a media server.
When I put in a new tape I get the following within the Activity Monitor
/2/2008 4:00:18 AM - awaiting res...
I have the HP Data protector version 6 as a backup solution.
The file system backup works fine however i have a problem creating backup for the Exchange(Both server and single Mailbox).
When...
I made an acronis backup file (.tib), which is about 9gb, and the situation is like this:
1. The file appear as a correct type of acronis and I can click on it in order to see the backup da...
After backing up our data daily for years fat dumb and happy, we recently had a need to actually restore a few files. When looking at the log file the backup (with verify) runs with just a few...
I have a 40gb IDE hard drive, formatted into five partitions. The software on the hard drive is a heavily modified, proprietary version of debian linux that is used as the operating system for...
