I was wondering if it's possible to deploy a Norton Ghost Image through Windows Deployment Services. The image would be deployed from a server running Windows Sever 2008 to a dektop running Wi...
- got some old P4 pcs now i am planning to format and load the windows and all the required applications. I have created a master PC and i have created ghost image of it, what's the best way t...
I am trying to image a Windows XP PC that has Unimaco SafeGuard Easy 4.20. I have tried using Ghost 8.3 with the following switches -FFX (Use Extended INT13) and -IA (Sector by Sector copying...
I installed Ghost Solution Suite 2.0.1, Ghost Console, to my Windows XP machine. I installed the Client to another machine, laptop1. I can't get the two to connect. At first, the laptop did ap...
Does Norton Ghost 6.5 or later work on ghosting a drive with Apple OS X 10.4 to CD? I have licensed all versions from 6.5 to the latest so if someone also knows what version works I can use that.
I have tried a few times to copy/upgrade my entire drive to a larger drive.using Nortong Ghost 9.0 I have done some multiple times (disc to disc) and it makes it to the blue windows screen w...
I am ghosting a lot of Dell GX1 machines with Windows 2000. After Ghosting, the machine starts up and the Windows Splash screen appears momentarily followed by a dark blue screen with the fol...
I decided to try and create a back up of my laptop last Friday before I attempted to do a system restore (back to factory settings). I have had to bounce the backup files around to different e...
Hi Everyone!
At this time we are using Symantec Ghost Solutions Suite 2 to Image PC's to rapid deployment. I have figured out how to use PXE booting to allow for restores of the images t...
Is there an application that can look inside a GHO and configure it with a correct admin password or update a piece of software within the image. Is this pie in the sky thinking? I thought t...
I have an old PoweEdge 2400 server w/ single 1GHz P3 CPU, 1.5GB RAM, (x4) 36GB & (x2) 300GB SCSI drives and 2 network cards. Since the server is old and takes up about 6U or something like th...
Does anyone know if Symantec Ghost 8 Corporate can Clone Red Hat/Linux OS Installations? I'm asking because I want to Ghost a Cisco Call Manager Instalation which runs on Linux OS.
Whenver I try to run Msft Backup or Norton Save and Restore I get a BSOD with BAD_POOL_HEADER. It also says:
xxxSTOP: 0x00000019 (0x00000020, 0xE6C5E800, 0xE6c5E820, 0x0C040601)
This ac...
On Norton Ghost, I have a drive image of my WD2500JB-00REA0 7200 rpm Western Digital hard drive.
If I want to transfer all that information to a new internal hard drive, must it be the same m...
I get the following error when trying to image XP Pro.
Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\). Error E0BB001B: Cannot lock volume \\?\Volume{39438060-...
Issue: Ghost - Very Very Slow when using Intel S5000VSA board with SAS RAID 5.
Details: I am trying to Ghost an image from an old server to a new server using an Intel S5000VSA board and its...
A small office running Windows 2000 Server on one machine with the rest of the computers running xp and the server has two hard drives. I like using Norton Ghost 12 but it is not compatible wi...
I have been using Ghost for some time to restore computers here in our learning center. I use boot disks that map a drive to a server and I pull down the image through the ghost.exe GUI. Yeste...
Hi all, I build computers to sell as a hobby. What I would like to do is create a set of images, sort of like the recovery disks that HP gives on their computers I want an easy way for the p...
I have HP Proliant ML150G3 with 2X160GB hard disks on "sata hostraid (adpahci)" raid controller as RAID1. I found on net that it is not fully hardware controller and that device drivers are ne...
Can someone help me understand how do one go about creating a bootable ghost images? I currently have my images stored on the server hard drive (on .gho and .ghs format - I believe they are sp...
If I want to simply periodically image a 2003 Server Enterprise or Standard, will Symantec Ghost Solution Suite 2.0 be all I need?
I've been using Symantec's Ghost product for years now and have been looking forward for the version that has a functioning ability to add files to an NTFS filesystem image. That day seems to...
Using Ghost to clone a harddrive, getting error message number 25002 Unhandled condition encountered: Attr translation will result in corruption of MFT table.
