Hi we just purchased a new R410 from Dell and with it a DRAC 6 Card I'm trying to configure it to remote access WITHOUT RDP before the desktop, while the computer boots for bios access. I have...
hi all
from a previous question i learned that i need to purchase some additional CALs. I was receiving the message below.
No license was available for user PIGEON\(user) using product ...
I have a really stupid question I had a buddy give me a dell poweredge 1800 server. Because he didn't want it anymore it came with the windows server 2003 small business edition. But it not co...
I have a number of HP Proliant DL 380 servers running Windows 2003 Standard Edition and for the past 6 months I have been having a problem with the servers rebooting automatically (ARS). The s...
Hi,
Does anyone know if the PERC 4/DC is supported in Windows Server 2008 R2?
There is a 2008 R2 driver for the 4e series but I can't find anything about 4 series.
Thanks,
Daniel
I've read all the posts about ports required. I have 80/tcp, 23/tcp, and 2000/tcp,udp open on the firewall.
I can telnet in and open the web interface from outside the firewall. When I tr...
I get the error message IB110 SBE Log Disabled on my Dell Poweredge 2850. I need to enable this log file so that I can find out what the error is on my server. Any idea how to do this?
Just got an HP ML350 G6 and can't see where to put the cache battery I ordered for the onboard RAID controller. I've found where to plug the wire in (as usual it plugs into the memory module) ...
Hello,
I am trying to create a RAID 1 array for the operating system on my HP DL380 G5. When I boot using the Smart Start disk and go to create the array the only available options are raid...
Scenario
I have a Windows 2008 machine with multiple IPs. It is a mass-mail server, and it can send mail through a number of IPs.
Problem
In the logs I have found some domains which the m...
I have a Poweredge SC 1425 that everytime it boots comes up with the following message:
Press <Ctrl-E> for BMC Setup within 5 seconds . . . .
Press F1 to continue, Press F2 to enter setup...
I have a DL380 G4 that has no video and does not POST. The lights on the front are all green, the power supplies are humming away and the NIC light is blinking it's head off. The SCSI HDD ar...
Hi there
Please post link for Smartstart download for HP DL360 G2 Server.
I am trying to set up my NFS server so that it works with kerberos. Kerberos is all working fine. kinit works on the server as well as the client without any problems, PAM works with kerberos ...
Hello,
We have HP ProLiant DL100 G2 with RAID-5 consisting of 2 logical volumes/arrays. The other day the RAID controller failed with a BSOD Fatal Hardware Malfunction (see screenshots attach...
Hi,
We have a Dell PowerEdge 1850 Server, running Windows 2003 Server.
Connected to this we have a Dell Powervault 220S with 5 x 73GB Ultra 320 SCSI.
The data on this RAID is critical.
...
I have a Dell Power Edge 2900 that is currently set up with a Raid 1 and I want to change it to Raid 5. The Current Hard Drives are backed up to a tape drive. Will I be able to just make sur...
When i try to copy autorun.inf to a windows 2003 server it shows access denied.
We are getting set to migrate some servers to VMware ESXi and NAS storage using an EMC AX4 with dual processors. After performing several speed test we determined that using raw RDMs was slig...
I've got a Dell PowerEdge 2850 with a Perc 4e/Di. I'm trying to install Windows Server 2008 R2 but it won't except the Dell driver for the Perc card. The driver states it supports 2008 R2 an...
I've got an IBM HS21 Blade Server with 6 blades, and two internal Nortel layer 3 switches. Blade #3 2 nics and has VMWare ESXi 3.5 installed. I'm trying to get the VM Machines on a particular...
How do I access or reset a "stuck" ilom on an X4450 SUN server from the installed solaris 10 OS.
Hello,
I would like to add more storage space on our server. Currently, we have 2 x 146GB and 2 x 73GB. I checked the spec for this model and HD maximum capacity said 1168GB. I'm wondering if...
Hello
Problem:
Unpacked a new server, about a week ago. HDDs were shipped separately, so i didnt even start it.
HDDs arived, plugged them into the server, start it up.
NOTHING!
I mean, po...
