I using an old version SCO Unix and would like to create a route that will not disappear after a reboot.
Is there a 'permanent' flag I can use?
(i.e. 192.168.100.0 192.168.0.1 -p)
Thanks!
I am trying to install OpenServer 5.0.4 on a PowerEdge 2300. The system is configured with three 9GB SCSI drives in a RAID 5 configuration on a Perc RAID controller, a SCSI CD Rom on a Adapte...
On Friday afternoon we had a power outage here in the building. This Dell PowerEdge was attached to a UPS, but that failed and the machine was shutdown hard. Now, the machine will not boot. Wh...
Been trying to figure out a way of adding persistent routes to a new SCO Openserver 6 server. I've been adding it with the "route add -net 1.1.1.0 1.1.1.254", but the routes don't retain afte...
Hi all,
I need small help to achieve the below requirement.
Data can be posted as url encoded , we need a way to decode the characters, parse the string into column values and cr...
When I use the netstat -m I see 3 failures for mblks as follows;
streams allocation:
config alloc free total max fail
stream ...
I wasn't sure so I thought I'd asked so that it won't bug me for the rest of the day. Would restarting the server automatically relink the kernal after a maintenace pack update?
We have a 30 user OpenServer license (5base+25). One of our programs is written in RM COBOL and as part of the program logic, it writes a text file into a specific directory. Once the data i...
I am trying to get our sco unix operating system (SCO_SV, release 5v.6.0.0) to power off our HP Proliant DL380 server?. I can get it to shut down and provide the "OK to power off" message, but...
I have a SCO release 5 system that is using sh as its default shell i would like it to use ksh as default when root logs in, how can I do this?
I'm running sco 507. I have 5 jetdirect print servers running fine. We are adding an hp laserjet 2840 with built in networking. Set sco to print to this ip and mac number and it will not print...
I'm running SCO and I needed to change my .zone file. I believe I have to restart in.named but when I run a kill on it nothing happens.
root 12268 1 TS 80 0 Jun 20 ? 328:...
After my SCO system boots up, the first screen displayed at the console is the GUI login. In the past, I could use CTRL-ALT F2 and switch to a "text" based login, or multiscreen login. Howev...
Greetings:
SCO Unixware 7.1.0 running on a Compaq Proliant. The embedded printer port died. Disabled printer in BIOS, deleted from OS (using scoadmin).
Installed a network printer (intel...
