We run a Cisco firewall for our VPN accounts. But when we HTTP to the firewall and download the ASDM launcher, it updates the files, after we put in the credentials, it freezes and does nothin...
Currently I'm using the built-in user database in the ASA 5505 to create users for VPN. However I'd like to integrate active directory users instead.
I have bits and pieces of what's requir...
Hi All,
I have a web server set up for public access through our Cisco ASA 5510 (see diagram below)
The web application will only answer to http header requests (URL) that are referenced i...
I have a Cisco ASA 5510 box setup with the following interfaces:
outside
inside
guest
dmz
management
I need to create some access rules that allow communication from the dmz network ...
I'm trying to set up a VPN, and Phase 1 comes up but then the "IKE lost contact with remote peer, deleting connection" comes up,
What could be causing this?
(see code section for detaile...
First off, I would like to start off with saying -- pardon my lack of expertise in Cisco.. Recently I've been slowly moving along but still get stuck and need to have my hand held with configu...
I have a Cisco 5505 which, for reasons I won't bore you with, I have had to do a factory reset on. I did this from ASDM. When I did it, ASDM kindly asked me if I wanted the inside interface t...
I am having a problem getting split-tunneling to work using the Cisco VPN client v5.0 attaching to a Cisco 5540 ASA.
The client works fine without split-tunneling active. I can VPN in and ...
The problem is: I can connect now using Cisco VPN Client, but I can not access any network behind ASA. Moreover, I get an IP from the pool defined, but I also get default-gateway on client mac...
Hi Experts,
I'm running ASA Version 8.0(2) and ASDM Version 6.0(2) on my ASA 5505.
And I have set up Anyconnect VPN using SSL VPN Wizard. Also uploaded anyconnect-win-2.1.0148-k9pkg
W...
I'm trying to get a Cisco Aironet 1200 to show multiple visible SSID's. I have successfully created two, one of which is guest and connects users to VLAN 10 and is unauthenticated, the private...
We've created a vlan on our cisco asa 5510 as follows:
interface Ethernet0/1
description Inside MPLS interface
nameif inside
security-level 100
ip address 192.168.40.5 255.255.248.0...
I have an existing remote access VPN on PIX 501 and I want to have different usernames and passwords to access this. I dont want to have every VPN user to use the same one.
Thanks
Hello,
Where can I find the Cisco ASA5505 8.2 and ASDM firmware for download? It looks like you have to have privileged access to download it from the Cisco site.
Here's the set up:
DSL Connection -> ASA 5505 -> MS Small Biz Server 2003 R2 Std.
Currently the Remote VPN is working fine authenticating against the local user database in the ASA. But ...
Hi,
Im looking to setup a free TFTP server and copy my startup configuration to the TFTP server as a backup.
Anyone know a good easy to use server and the cli commands to configure it to...
We are having issues finalizing the routing of traffic to all of our Cisco 3560 VLAN Switches from the work we have done duplicating the configuration from our Cisco ASA 5510 & 3750 schema.
...
After an upgrade of the system and the asdm image I can only login via ssh.
In my web browser I receive "404 The requested URL /admin/index.html was not found on this server. "
For system-...
I have read through a number of threats, but it didnt work for me.. I still can not ping outiside interface.
Here is my config, please advice.
hello, we have 3 VPNS that are connected, 2 of them are perfect (10.0.0.0 and 10.3.3.0) but the other one is extablished, but when we check the VPN status, bytes RX = 0 bytes TX= climbing n...
Well, now that Windows 7 is here and Cisco's IPSec won't work with Windows 7 64 Bit, I've had to take a look at Cisco's Anyconnect client.
This is the main thing I don't like and not seeing...
Hi,
I am getting a lot these messages in my ASA log file. I need to trace these cause I suspect it may be my ISP because the SSH access is limited to only a few addresses.
Oct 07 2009 ...
I need to remotely work on a machine running XP Pro SP2. Remote Desktop is enabled is working fine inside the LAN. While doing this I still need to access the local LAN remotely.
I am conn...
How to block HotSpot Shield with an Cisco Asa 5520 ?
My company currently has a single location with one ASA5505 connected to a 10MB MetroEthernet connection. We are shortly moving to a new location where the primary Internet connection will be...
