Hi experts,
Anybody out there know how to solidly block the software ultrasurf.
I am the administrator for my coporate firewall and we also have in place a bluecoat filtering system. Both ...
Hi All...
I have an issue that involves a cisco asa 5510 with sa 8.0.3 and a windows xp client. The client wants to use the built in L2TP vpn capabilites in xp versus loading the cisco vpn ...
I caanot seem to get my netscreen remote to make a connection. It's like trying to connect to the CIA. I followed instructions from articles, step-by-step instructions ... you name it I read...
Below is my config - trying to get SSH or RDP to port forward from FastEthernet4 to 192.168.1.2 on Vlan1.
Please double-check my firewall and routing - I'm abit over my head in Cisco stuff ...
Basic Router Config / Cisco 800 Series
Router can ping internet, LAN computers can not browse web or ping internet
For example, from the CLI on the Cisco box, if I ping google, all is good...
Hi Experts,
I need a proxy server to do the URL redirection;
This is the scenario; we have web server, app server and the DB sever.
In the Web server we needs to accept the HTTP and red...
Hi,
I need to have a VPN from a PIX506e and a remote private network
We will use NAT to map certains through the VPN
192.168.100.0/24----PIX506----internet----------------------remote F...
How do I allow or forward ssh connections to a specific device with the ASA. I have the the following setup. I know how to forward the incomming SSH traffic on the ISA but need help with the ...
Hi I am trying to use the P2P program Utorrent, and i did all the instructions for PORT FORWARDING, on my router and on my Windows Xp Firewall, but the ports are still blocked. I think maybe M...
I'm trying to configure Serv-U to run in passive mode behind a Cisco ASA 5505. What is the proper way to do this?
I would like to list my open ports and rules in a text file similar to cisco pix Sh access--list | in ***.***.***.***
or sh run
but for netscreen n208 in GUI and command line mostly, m...
I was trying to access http://www.kalabaster.com/tools.html but the siet is being rebuild, so can anyone give me this files please?
Thanks in advance
PAMF
being new to firewalls and proxy servers i have a small network with limited bandwidth for the internet and was wondereing how to configure my Cisco ASA5505 using ASDM software to block certai...
I needed some help in enabling the SmartDashboard GUI. I am able to login via WEBUI and telnet into the box. But can't seem to understand why SmartDashboard is not working, keeps giving me a E...
I have users who need to run an IPSec VPN from a client through my RedHat Linux-based router, which is running a Shorewall firewall. The firewall is doing NAT. I have a single public IP add...
I configured the 1811w using SDM and by mistake created a firewall that is screwwing up all my traffic going to the internet. By that I mean it is very slow and some site do not even come up. ...
I have the following network lay out
ISP----------------------------+
|
Linksys Router WAN DHCP to Cable Modem
| LAN 192.168.7.x/24
||
ISA 2006 North 192....
Hi
I have setup LAN-LAN tunne lbetween PIX-525 and PIX-515.The host 219..47.190.93/32 is behind PIX-525 and 912.168.243.0/24 is behind PIX-515.I cannot see the tunnel coming up .Also,I d...
Hello,
I am unable to ssh to the Pix. I am able to telnet though. I'm using putty and I get an error message stating. Putty fatal error. Server unexpectedly closed network connection.
te...
I am using Windows Internet Security and Acceleration Server 2004 for my Proxy Server. With my new ISP, I can no longer have my natting tables on the router located outside my firewall. I nee...
HI
Does any one knows as to how many access rules can be defined through asdm in ASA5510.?Or Any limit on access-lists quantity ?
Thanks
I have a big network spanning covering many areas head office with power of 500 all branches about of 200 users except one site with power of 500 users which product in juniper fillfull the pr...
