Integrating SCCM and MDT 2008
For our deployments, we always install MDT 2008 on our SCCM server and select Configure ConfigMgr Integration from the MDT area on the start menu. This gives us:
" Templated task sequences we can import into SCCM
" Additional TS Variables for use in our task sequences
" Additional options and flexibility around computer backup, USMT etc
For beginners, the template task sequences are a very quick way to get up and running while being guided through the process, while for more advanced users the additional functionality comes in handy when your task sequences become more complex.
Setting yourself up
In order to have any chance at troubleshooting SCCM OSD issues, you need to do the following
1) Install trace32.exe which is part of the SMS 2003 Toolkit 2 (http://www.microsoft.com
2) Enable command line support within your boot images
a. Go to the properties of your boot image(s) <Right click | Properties)
b. Go to the Windows PE tab and tick the Enable command support (testing only) option
c. When prompted, click on yes to update your distribution points
d. From within your boot image (Windows PE) environment, you can now pres F8 to open up a command window -- very useful for troubleshooting
3) Be familiar with your OS setup log files (eg WindowsXP has setupapi.log, netsetup.log etc)
Log files
The root of all Task Sequence troubleshooting is called smsts.log -- and this log is always the first step to troubleshooting any TS issue -- if you have an issue, look in here first!
Unfortunately, the smsts.log can be stored in one of 7 locations, depending on the stage of the build and the architecture of the OS:
WindowsPE, before HDD format: x:\windows\temp\smstslog\s
WindowsPE, after HDD format: x:\smstslog\smsts.log and copied to c:\_SMSTaskSequence\Logs\S
Full version windows, before SCCM agent installed: c:\_SMSTaskSequence\Logs\S
Full version windows, after SCCM agent installed: c:\windows\system32\ccm\lo
Full version x64 windows, after SCCM agent installed: c:\windows\sysWOW64\ccm\lo
After Task Sequence has finished running c:\windows\system32\ccm\lo
After Task Sequence has finished running(x64) c:\windows\sysWOW64\ccm\lo
Information is also logged as SCCM client events, which can be viewed by running the SCCM report Last 1000 messages for a specific computer (Errors, warnings and information)
As a general rule, the SMSTS.log provides more detail, however the SCCM client events are easier to read, and, for simple issues, can lead you to the root cause very quickly.
PXE boot issues
In order to resolve PXE boot issues, there are two main log files we are interested in:
" Pxecontrol.log -- which is located in the installation logs directory (eg C:\Program Files (x86)\Microsoft Configuration Manager\Logs\pxecontrol.lo
" Smspxe.log -- which is located in MP logs directory (eg C:\Program Files (x86)\SMS_CCM\Logs\smspxe.
If this is the first time you've setup a PXE service point, I recommend you check pxecontrol.log, there should be lines similar to the following:
adding address to server list 192.168.00.117 $$<SMS_PXE_SERVICE_POINT><
adding address to server list 127.00.00.01 $$<SMS_PXE_SERVICE_POINT><
Sending availiability packet to: 192.168.0.117~ $$<SMS_PXE_SERVICE_POINT><
Sent 274 bytes to 192.168.000.117:4011~ $$<SMS_PXE_SERVICE_POINT><
PXE test request succeeded.~ $$<SMS_PXE_SERVICE_POINT><
Successfully performed availability check against local computer.~ $$<SMS_PXE_SERVICE_POINT><
If not, WDS or the PXE service point is not correctly installed. Without going into too much detail in this area, as a catch-all fix:
" Uninstall the pxe service point
" Uninstall WDS
" Reboot
" Install WDS, but DO NOT configure
" Install the pxe service point
" Re-check the pxecontrol.log
Another very common error is to see the following when trying to pxe boot:
PXE-T01: The specified file was not found
PXE-E3B:TFTP error -- File not found
This error is caused because you are missing files from your \remoteinstall\smsboot\x86
1) The x64 boot image has not been added to the PXE service point. " But I'm only deploying an x86 boot image and OS " I hear you say. It doesn't matter. If the machine is x64 architecture (which all today's new machines are), the boot ROM requested will be x64. This in no way effects your ability to use an x86 boot image; this boot ROM process is completely independent. The solution is to add the x64 image to your PXE DP and update. You will then see the directory \remoteinstall\smsboot\x64
2) Even after you update your PXE DP, the files still don't show up, this is a common issue. When updating the DP, the WIM file is mounted (under C:\windows\temp), all your modifications injected (such as drivers, custom backgrounds etc) and then packed back up into the boot wim pushed to the DP. At the same time, the boot ROM files were interested in are extracted to C:\Windows\temp\Pxebootfil
On some computers, you may PXE boot, proceed to see a screen which indicates that the PC is talking with SCCM, followed by a line which indicates a boot ROM called abortpxe has been used. This indicates:
1) This computer has already been built via PXE. If you want to run this advertisement again, you must go into the console, right click on the computer record and select clear pxe advertisement
2) There is no advertisement for this machines mac address or SMSBIOS GUID in the database. This can be confirmed by viewing the smspxe.log. In this case, you should ensure that
a. The computer record has the correct MAC address
b. The computer record is in a collection which has the task sequence advertised to it
c. The task sequence advertisement is available to PXE boot (a property of the advert)
Software Update issues on reference build
While creating the reference build, the target machine must not be a member of a domain (and therefore must only be in a workgroup). Because of this, the machine cannot use AD to lookup SCCM server location details and software updates will fail (after a 20 minute wait)
To work around this, in your reference build TS, navigate to the step setup windows and configmgr and in the installation properties add SMSSLP=<fqdnOfSCCMServer>
In the case that there are a large number of updates to be downloaded, you may also find that this task fails. This is caused by an issue documented at http://blogs.technet.com/
Drivers
The deployment guys have a fantastic blog post on how to handle drivers here - http://blogs.technet.com/
Boot image drivers
SCCM boot images are customised windows PE 2.x images used to boot the computer and contact the SCCM server. There are a couple of basic rules when working with boot images:
1) SCCM boot images only require network and local disk access (as they need to grab data from the SCCM server and apply it to the local disk) so these are the only drivers that ever need to be added to a boot image. (adding additional drivers will only bloat the image, slowing down your installs)
2) SCCM boot images are based on Windows PE 2.x, which is based on Vista. You must add vista drivers to your boot images only. Even if your deploying on XP, it doesn't matter, the boot environment is completely separate to your final OS.
The way I find out if I need to add additional boot wim drivers is to simply boot any new machines into a OSD TS, boot, press F8 to get a command prompt, then run an ipconfig -- if there is no ip address -- we don't have NIC drivers and they need to be added, then run diskpart | list disk -- if there are no disks listed, then we need to add mass storage drivers to the boot WIM.
Windows XP 07B stop issues
If your building Windows XP or 2003, these operating systems do not allow dynamic injection of mass-storage drivers. So, you have a few options:
1) Move to Windows 7 -- which after 6 months of betas/RCs and now running RTM - I'm willing to say is brilliant
2) Change the disk controller mode from AHCI or RAID to IDE in the BIOS (quick, but not recommended for a long term solution)
3) Use the appropriate AHCI mass storage drivers
a. Import the drivers into SCCM, using categories etc (see the deployment guys blog post on best practices for this)
b. Add a task to the task sequence Apply driver package
c. Select the appropriate driver package
d. Check the box Select the mass storage driver within the package......
e. Select the appropriate driver
f. Add a condition via a TS variable <model> or WMI Query (again, covered in the deployment guys post)
Task Sequence Variables
Task sequence variables are really what give task sequences a bucketload of power, as you can have one TS which accounts for all the variations in your environment.
One of the most common questions we get is how do i know what TS Variables are available , well, there is a list at - http://technet.microsoft.
The advantage of dumping them all is that the output actually has meaning , so you can see what variable has what value -- as opposed to just looking at a bunch of variables might not mean much to you without values assigned to them.
In addition to the built in variables, you can add custom variables to computer objects or to entire collections.
SCCM Client Version
If you are using SCCM 2007 SP1, there is a hotfix, KB955955 which you should apply, as it removes a delay between tasks, which, for long task sequences can significantly reduce build time. This hotfix is available from http://support.microsoft.
