Ron Dokken
asked on
MDT media deployment - no keyboard/mouse in Win PE
Image is successfully put on MEDIA (ISO).
The ISO is then put on a USB (with WUDT).
When the ISO is run in test VM, it all works fine.
Deployment wizard works.
(Vmware workstation can't boot from USB)
Problem:
When the USB (content same as ISO) is put in Dell prod. server, Deployment Wizard starts but..
there is no KVM input!
What have gone wrong?
Previous questions
https://www.experts-exchange.com/questions/28738099/MDT-2013-up-and-running-now-time-to-create-bootable-USB's.html
https://www.experts-exchange.com/questions/28739404/MDT-2013-PXE-install-and-Offline-Media-install-USB-do-not-behave-the-same.html
The ISO is then put on a USB (with WUDT).
When the ISO is run in test VM, it all works fine.
Deployment wizard works.
(Vmware workstation can't boot from USB)
Problem:
When the USB (content same as ISO) is put in Dell prod. server, Deployment Wizard starts but..
there is no KVM input!
What have gone wrong?
Previous questions
https://www.experts-exchange.com/questions/28738099/MDT-2013-up-and-running-now-time-to-create-bootable-USB's.html
https://www.experts-exchange.com/questions/28739404/MDT-2013-PXE-install-and-Offline-Media-install-USB-do-not-behave-the-same.html
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
And how to import them to Deployment Workbench?
ASKER
Or is it drivers for the specific KVM equipment?
ASKER
When the same image is deployed by means of PXE, then KVM works. So somehow the correct drivers must be present on the WDS/MDT server?
Why are they not in Media ISO?
All drivers are selected in Selection Profile.
Why are they not in Media ISO?
All drivers are selected in Selection Profile.
ASKER
Attaching a separate USB mouse directly into the server does also not work (when deploying from USB).
ASKER
When booting from the USB on a physical Dell laptop, keyboard and mouse works in Deployment Wizard..
ASKER
I'm not the only one..
http://en.community.dell.com/support-forums/servers/f/956/t/19602693
http://en.community.dell.com/support-forums/servers/f/956/t/19602693
ASKER
And the solution.. this particular server needs 64 bit WinPE.
ASKER
I've requested that this question be closed as follows:
Accepted answer: 0 points for dr_fred's comment #a41163584
Assisted answer: 500 points for ve3ofa's comment #a41148787
for the following reason:
"Who's got the best kung fu?
-the best kung fu is yours!"
Accepted answer: 0 points for dr_fred's comment #a41163584
Assisted answer: 500 points for ve3ofa's comment #a41148787
for the following reason:
"Who's got the best kung fu?
-the best kung fu is yours!"
ASKER
Actual solution at the end :) Thx!
ASKER