Link to home
Start Free TrialLog in
Avatar of Michael Robinson
Michael RobinsonFlag for United States of America

asked on

How to re-install 2 RAID drives after I installed win 10

How to I get my pc to recognize 2 RAID  disks that I use for back up (not for OS).

My boot disk crashed.  It was win 7.  
I installed a new boot disk with win 10.

But it won't recognize my 2 Raid 1 disks.

This is an Asus mobo using Intel ICH10R controller for the RAID.

There is back up data on these RAID disks - from when I had win 7 running.

If I go into BIOS, Storage Configuration and set it for RAID, win 10 gets stuck while booting.

If I use BIOS with Storage Configuration set for IDE  win 10 boots fine, I can see all my non RAID disks, but can't see the 2 RAID 1 disks.

There is another Storage Config - AHCI which did not work either.

When I use the Intel Matrix Storage Manager (control I) it shows the 2 RAID disks.  

It seems there should be a way to give this RAID volume a drive letter, but I need Win 10 running for that. But as stated, it locks up if Bios is set for RAID.

Any ideas?
Thx
ASKER CERTIFIED SOLUTION
Avatar of Michael Robinson
Michael Robinson
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial