I need a very specific configuration, which i dont know if its possible.
I want wireless clients to connect to the access point just if their user belongs to an active directory group. Just that...
http://www.experts-exchange.com/Networking/Misc/Q_21498158.html
I want this to hook up a Cisco 1131AG WAP to our Windows network and 1) serve out a secure WPA connection that would pass full network access to authenticated users, and 2) also serve out an open c...
http://www.experts-exchange.com/Networking/Wireless/Standards/WAP/Q_22978395.html
I need some architectural and syntax assistance. I have 5 Cisco 1131AG's, they plug into a Cisco 3560G-PS. I need to create a separated scheme for those devices to point to the internet without l...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Q_23332115.html
Hello,
I use object groups on our Cisco Pix to simplify changes on a number of computers from the access perspective. I am working with a Cisco Aironet 1131AG and would like to implement someth...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22138612.html
Zones:
RoutersDate Answered: 08/10/2008 Grade: A Views: 0
Hi,
I've mesed up the settings to one of my WAP's. I need to set it back to factory settings. I see a small button on the inside of the device that is only accessible with a pencil or paper clip...
http://www.experts-exchange.com/Networking/Wireless/Standards/WAP/Q_23007643.html
Problem: I have attached a console cable to the console port in order to program the device fron the IOS interface, I am using Hyperterm for this. I am not able to get the IOS interface to respond ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_23132255.html
Today I began the process of deploying a wireless network, but ran into a few snags and need some help.
Let me start with some background of what I'd *like* to do. We are deploying nine wireles...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Access_Points/802.11...
I have a Cisco 2000 Series Wireless Lan Controller with 3 Cisco Airenet 1131AG Access Points. It work wonderfully for over a year. In December we had a power outage and ever since then my Wireles...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Adapters/Q_23142422....
I have read all of the posts regarding similar issues with upgrading from LWAPP to Autonomous Mode. Here is my case:
I have 2x Aironet 1131AG Wireless Access Points.
One is brand new and has ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Access_Points/Q_2355...
