I need to setup pc anywhere host and remote for a friend. They want to connect to there work PC from there home PC ONLY. The home PC does not have a firewall but it is setup in a home domain. I th...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/PC_Anywhere/Q_2341...
I have 3 DC's running Server 2003 with 20 users and want to install Symantec's pcAnywhere 12.1- 1 single user version on the DC 3 and install it on my home computer to remote in at nights and weeke...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/PC_Anywhere/Q_2384...
Hi,
i'm trying to build a trunk between 2 cisco catalyst 3550, both on port f0/1 and the port stay shut down.
here is the configuration of the first switch
Building configuration...
Curre...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23405671.html
I use Applian's WMR recorder to capture streaming .rm files and have done so for months with no problems.
Over the weekend I re-installed my PC (XP Pro SP3 C2D E6750) and now although I capture ...
http://www.experts-exchange.com/Software/MultiMedia_Applications/Q_23413356.html
I have a deticated T1 line that has cisco routers on both sides. After digging into it I found that there is no line timming configured. Both ports are set to get timing from the line. Our t1 provi...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23723520.html
Zones:
RoutersDate Answered: 09/15/2008 Grade: A Views: 0
I have a switch running CGI script nph-test-cgi on a switch. How can I remove or delete it? And what will happen when I do that?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23798864.html
I have a user at the company that I work at that needs to have access to his work PC from his house. Instead of buying a brand new laptop or configuring a used one our of own, we decided to just b...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q-23885395-How-can-...
I've been able to sync my 2621 router to tock.usno.navy.mil but is off by 1 hr. The NTP server is in the correct time zone -5 EST. Any suggestions?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22867129.html
I can't connect to my Mom's computer - her host is waiting for a connection, my remote is configured exactly like her host (encryption set to none, IP address is correct and ping-able). The connect...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/PC_Anywhere/Q_2336...
I have a 6509 switch that has the following configuration on it:
interface GigabitEthernet2/12
no ip address
flowcontrol receive on
switchport
switchport access vlan 2
switchport mode ac...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23050312.html
