I am a little confused on the setup of my existing router which I inherited. We have one command that states
ip nat inside source static 10.X.X.2 6X.X.X.37 route-map no-nat
and then we have ACL...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23290625.html
Hello Experts,
I'm using Cisco router with two virtual IP all my machines coming through the sane interface. I made exception for my Exchange server to come out from a different interface to muc...
http://www.experts-exchange.com/Networking/Network_Management/Network_Operations/Q_2336903...
I'm having trouble with one host accessing the internet after altering the config on a cisco 1800 router. I am attaching sanitized copies of the config before my changes and after. I created a dyna...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23464433.html
Zones:
Routers,
VPNDate Answered: 06/06/2008 Grade: A Views: 0
I have 3 remote locations that are connected to my main office with VPN tunnels. They are using split tunnels, however, allowing the internet traffic from those locations to go out over their own ...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Hi, this relates slightly to my previous question which you may need to read. I am trying to set some NAT up through my cisco 1841. I have 4 ip addresses from my ISP and currently I can only seem t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23066197.html
Zones:
RoutersDate Answered: 01/09/2008 Grade: A Views: 20
I need to setup a VPN between two routers to allow only windows domain login and file sharing traffic to pass through.
What routing and firewall settings do I need to change to enable this? Can...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23233972.html
I bought new CISCO router 2821, the problem is when i login to SDM i get a screen as attached. able to login sucessfully. hope this is not the currect SDM sreen. I tried from different notebook, st...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23237450.html
Zones:
RoutersDate Answered: 04/12/2008 Grade: B Views: 56
Hi there,
I have a Cisco 3640 with a NM 16-ESW and a CSU/DSU card.
I would like to be able to utilize my IP pool off of the NM-16ESW switch hwoever, the only way that I can seem to get the sw...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23297806.html
Need to get EDI transfers from a customer Secure FTP server. They give us the option of either using SSL or SSH.
For SSL they suggest setting up the FTP client to use:
- port = 10021
- Transfe...
http://www.experts-exchange.com/Networking/Protocols/Application_Protocols/Email/IMAP/Q_23...
We recently installed a new MPLS circuit requiring us to configure OSPF in conjunction with EIGRP. I can ping the remote end 192.168.131.1 from our core network 192.168.1.0 but cannot ping the cor...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23450051.html
