Advertisement

1 - 3 of 3 containing alltags:("12.4(15)T5") (0.001 seconds)
 
Network Routers 3
Network Operations 1
IPSec Security Protocol 1
Internet Control Message Protocol (ICMP) 1
Virtual Private Networking (VPN) 1
 
 
 
Cannot issue command "class-map"
Tags: Cisco, Cisco 800 Series, 851W, 12.4(15)T5
I updated my Cisco 851W to IOS 12.4(15)T5 today. To start with a fresh system I have reset the router to the factory default. When I try to configure the firewall with the SDM I get an error at ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23431559.html
Zones: RoutersDate Answered: 07/02/2008 Grade: A Views: 47
vpn to ASA5100 show down and ghost interface appears NVI1
Tags: Cisco, Cisco 871W, Version 12.4(15)T5, ghost interface NVI1 shows
I have a 871W which is behaving strangely. 1) NVI1 is not in the config but it appears in output of sh int br with same ip as FastEthernet4 Synergy-SC#show ip int br Interface               ...
http://www.experts-exchange.com/Networking/Security/IPSec/Q_23502839.html
Zones: IPSec, Routers, VPNDate Answered: 06/21/2008 Grade: B Views: 0
How do I provide icmp-answer from both cisco 2811 external...
Tags: Cisco, Cisco 2800 integrated services router, 2801, IOS ver 12.4(15)T5
We have 2 ISP. Our cisco 2801 is configured with 2 external, 1 internal interfaces and NAT overload. All traffic goes through the first internet connection. If the first internet connection becomes...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23669572.html
Zones: Routers, ICMP, Network OperationsDate Answered: 08/24/2008 Grade: A Views: 10
  • 1