hi everyone,
I have 2 cisco wireless access point which i want to install in my office , but i dont want them to be different SSID as i want both to generate same ssid so if users get disconnect...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Adapters/Q_23113201....
whats the procedure to change from cisco ios to LWAPP on a aironet 1200 series ?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Access_Points/Q_2315...
I keep getting the following error
"An error occured during the installation of the device.
The environment specified is invalid"
I probed all the links at the HP support site and could not...
http://www.experts-exchange.com/Hardware/Peripherals/Printers_Scanners/HP/Q_23225546.html
Zones:
HP PrintersDate Answered: 03/29/2008 Grade: B Views: 65
I have a Cisco 1200 series wireless access point. I want to know what i need to do in order to extend the wireless signal. We are in a large building and we don't get a signal in some parts. Do i n...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Access_Points/Q_2332...
I'm not sure if this has to do with the 802.11(a,b,g,n) standard, but the situation is this. We have a wireless network that supports all of these standards using several Cisco Aironet 1200 series...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Access_Points/Q_2378...
hi guys,
i have a Cisco access point 1200 series,right now its unsecured,but want to put a key in for wireless accessonly for staff.
the access point has 172.31.185.220 what i want is to defi...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Access_Points/802.11...
I have 12 Cisco Aironet 1200 Series Wireless Access Points mounted to the ceiling with 2 Air-Ant1728 2.4GHz., 5.2dBi Omnidirectional Ceiling mount antennas attached to the device and deployed throu...
http://www.experts-exchange.com/Networking/Wireless/WLAN/Q_23073417.html
We recently tried to upgrade the IOS and a Cisco 1200 series wireless access point and some time during the upgrade it would seem we lost connection to it. We have since taken the access point dow...
http://www.experts-exchange.com/Networking/Wireless/Standards/WAP/Q_23093915.html
Zones:
WAP,
WirelessDate Answered: 01/21/2008 Grade: A Views: 36
how can I get driver for hp laserjet 1200 to support WINDOWS2003
http://www.experts-exchange.com/Hardware/Peripherals/Printers_Scanners/HP/Q_23604363.html
Zones:
HP PrintersDate Answered: 07/30/2008 Grade: A Views: 0
When I boot up the Cisco Aironet 1200 Series Access Point I get the following in hyperterminal..
modem file system is available.
flashfs[0]: 147 files, 7 directories
flashfs[0]: 0 orphaned fil...
http://www.experts-exchange.com/Networking/Misc/Q_23380576.html
