Enter Keywords:
1 - 10 of 20(0.019 seconds)
Sort By:
 
Hi all,    I have just purchased a 160GB HD and when I hooked it up, WindowsXP recognizes it as 128GB HD. Do I have to update my BIOS again? Any ideas? Thanks... -CompuTurk
Zones: Windows XPDate Answered: 10/23/2002 Rating: 7.6 Views: 0
hi: my wd250gb now only 128gb at first it formated in dynamic, then my comp crash and i only see 128gb i play around with it and change it to basic...still 128gb to allocate..... thanks, ...
Zones: Drives / StorageDate Answered: 08/26/2005 Rating: 9.0 Views: 0
Hi I've got a hitachi 180GXP 180GB hardrive that will not recognise above 128GB in win2k(SP3) .  I'm runnning the disk off an Abit KR7A-RAID board but have also tried the disk on other Boards a...
Zones: Drives / StorageDate Answered: 03/22/2003 Rating: 6.6 Views: 0
Hi there, a friend of mine has recently purchased a 250Gb IDE drive, he is currently running Windows 2000 (all patches and updates) on an Athlon 1800XP, 512Mb ram, i'm not sure what the mainboard...
Zones: Drives / StorageDate Answered: 03/11/2004 Rating: 7.6 Views: 0
Hi, I have an older G3 running OS version 10.2.8, server version.  I recently purchased a 400GB ATA Segate to put in it.  This drive is configured as the slave.  I found on Apple.com an article sta...
Zones: Apple Network HardwareDate Answered: 03/27/2006 Rating: 7.2 Views: 0
Hey, I recently bought a seagate st3160023a 160gb, after installing win2k pro + sp4 I see only 128 usable space how do I fix that? Best Regards Tom
Zones: Drives / StorageDate Answered: 05/13/2004 Rating: 9.2 Views: 0
I've installed a 200GB Western Digital IDE Hard Drive onto a user's machine.  However, after an intial format, it only reads 128GB.  Anything I can do to retrieve that lost 72GB, or do I just chalk...
Zones: Drives / StorageDate Answered: 06/15/2004 Rating: 7.2 Views: 0
I have a winchester WD2500 dive on my system running XPpro.. System has a motherboard  called P4P800-E. How can I format this drive as I get a max of 128GB on this drive only. Is there a utility?
Zones: General SystemsDate Answered: 10/30/2004 Rating: 7.6 Views: 0
Ok before we jump to the obvious solutions let me point out that I currently have 3 hard disks, all which are plugged in on the primary "PCI Bus Master IDE Controller" channels 0 and 1. (also have ...
Zones: Drives / StorageDate Answered: 08/12/2006 Rating: 9.0 Views: 0
I reinstalled Windows XP Prof on my computer and my 500gb disk was only seen as 128gb in Disk Management. I assumed this was due to the fact that SP2 is not installed. I then accidently activated...
Zones: Drives / StorageDate Answered: 08/14/2006 Rating: 7.4 Views: 0