Enter Keywords:
Search Within Results
 
 
Narrow Results
Can't Find a Solution
 
 
 
1 - 7 of 7(0.001 seconds)
Sort By:
 
I have a 130 GB HD connected  by a SATA port. The pc recognizes it in the BIOS and detect it in windows but i cant find a shortcut or icon to the HD, i really need the space... any help on how to g...
Zones: Drives / StorageDate Answered: 12/26/2003 Rating: 7.2 Views: 0
I recently bought a Maxtor 300gb harddrive, I formated a 300gb NTFS partition on it after installing it in my system. I used the harddrive to back-up data on a friends computer, the problem is that...
Zones: Drives / StorageDate Answered: 02/13/2006 Rating: 6.0 Views: 0
i installed win 2000 server os and it doesn't see 200gb. in computer management it only shows 130gb harddrive space that i can use to create partions etc ... instead of 200gb. during initial win 20...
Zones: HardwareDate Answered: 08/16/2006 Rating: 9.0 Views: 0
Hi Everyone,        I have recently had a problem with Windows Logon maybe because of installing Symantec PCAnywhere. It replaced my mscvrt.dll file and an error  "Entry Point not found" was being...
Zones: Windows XPDate Answered: 02/06/2004 Rating: 8.2 Views: 0
I have 2 ata100 WD 120gb drives which i can get about 113GB out of which is fine, but I just bought a maxtor sata 200gb drive and can only use 126GB of it.. how do I lose 74GB on an sata drive wher...
Zones: Drives / StorageDate Answered: 07/15/2005 Rating: 8.2 Views: 0
I bought a western digital hard drive with a 200gb capacity and windows does not see the full capacity of this hard drive at the fresh windows installation, the os only detects 130gb. After I insta...
Zones: Windows 2000Date Answered: 11/12/2004 Rating: 9.2 Views: 0
I have hard disk SAMSUNG 250GB. I connected it through ATA (motherboard is GIGABYTE GA-8IP775); BIOS recognized it properly without any problems, but when I tried to partition it under windows 200...
Zones: Drives / StorageDate Answered: 11/16/2006 Rating: 8.0 Views: 0
 
  • 1