what will happen if i put two hard drives in one ide channel and the master is an ultra dma 133 and the slave is ultra dma 66? would the ide channel follow the speed of the ultra dma 66? if so the ...
http://www.experts-exchange.com/Hardware/Misc/Q_20585381.html
Zones:
Misc HardwareDate Answered: 04/23/2003 Rating: 7.6 Views: 0
System is pentium 133 with win95 ver 4.00.950. Award BIOS. HDD 1.5GB and HDD 248MB. Sound blaster sound card which also drives the CD. ID on mother board is a MAGITRONIC P/N 1A-9597JV2-A.Also print...
http://www.experts-exchange.com/Hardware/Misc/Q_10254672.html
Zones:
Misc HardwareDate Answered: 01/09/2000 Rating: 7.4 Views: 0
Like the header says I want to know if I can use a 133mHz Processor on my 100mHz Motherboard. Also I want to know if I can use 133 mHz on the same motherboard [the motherboard is a Tyan Tiger 100 D...
http://www.experts-exchange.com/Hardware/Misc/Q_20025527.html
Recently replaced a defective Athlon xp 1800 processor. I am running a ak31a shuttle MB. Bios sets up the default cpu clock as 100 with the new cpu. My old cpu was defaulted at 133 mhz which is ...
http://www.experts-exchange.com/Hardware/Misc/Q_20425083.html
Duplication process with 2 160 GIG WD hardrives fails...stalls out at around 87%.
original array was 2 IBM 40 GIGs.
I can image the 40's to the 160's, but the duplication fails at 87%.
I can bre...
http://www.experts-exchange.com/Storage/Misc/Q_21304069.html
Zones:
Storage MiscDate Answered: 02/11/2005 Rating: 8.4 Views: 0
hey,
my problem: i got an amd athlon xp +2100, if i change the cpu pnp to 100/100 (cpu/sdram) it detects my cpu as an athlon xp +1500 whích is pretty annoying since it makes my whole system slo...
http://www.experts-exchange.com/Hardware/New_Users/Q_20402598.html
I recently bought an IDE 40-pin, 80-conductor cable (supporting ATA 133), hoping that it would upgrade the transfer rate of my desktop PC to ATA 100 from ATA 33. At first, I simply replaced the old...
http://www.experts-exchange.com/Hardware/Misc/Q_20567369.html
I have a XP 2200 and a MSI K7n2 that I have been using for about 5 months now. I recently noticed that I was underclocking it and running a FSB of 100 instead of 133 which it's supposed to run at....
http://www.experts-exchange.com/Hardware/Misc/Q_20734080.html
Zones:
Misc HardwareDate Answered: 09/11/2003 Rating: 8.2 Views: 0
Hello, i've got a problem a lot of people got, but i still couldn't find a solution, i can't boot my system when the cpu frequency is 133, any ideas what could help? couldn't find any help on the o...
http://www.experts-exchange.com/Hardware/Components/CPU_Processors/Q_20819883.html
Hello,
I have an Asus motherboard that supports FSB 200/266/333/400. My processor is an Athlon 2,400 cpu speed 133. I recently purchased some expensive Corsair DDR 2,100 memory (2 times 512 mb DDR...
http://www.experts-exchange.com/Hardware/Desktops/Q_21362979.html
Zones:
DesktopsDate Answered: 03/24/2005 Rating: 8.6 Views: 0
