I have a Polycomm router hosting a T1 connection now and I'm trying to connect a Cisco 1601 in place of the Ploycomm with very little success. The Polycomm doesn't really route, I think it acts as...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20496246.html
Zones:
Routers,
SSIDate Answered: 04/25/2003 Rating: 5.6 Views: 4
Please, somebody tell me how to configure two Cisco 1601 routers over leased line with RAD ASM-31 modems on the both sides on the line. Modems are configured as Master-Slave. I have Cisco documenta...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_10639521.html
Zones:
RoutersDate Answered: 08/10/2000 Rating: 6.2 Views: 0
We are trying to connect a Cisco 1602 to a Newbridge 2701 DTU. The problem is that the Cisco 1601 comes with a 60 PIN serial connector, which can be connected easily to a DB15. The Cisco 1602 tho...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20081588.html
Zones:
RoutersDate Answered: 02/22/2001 Rating: 7.6 Views: 0
I will be upgrading the flash card to accomodate for a newer IOS feature set. Unfortunately, this router is a Run From Flash model, so i'm assuming I will have to swap cards and boot from the mini-...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20119253.html
Zones:
RoutersDate Answered: 02/02/2003 Rating: 7.6 Views: 0
I recently took over a position as network admin and am a little concerned about the previous admin's router configuration. We have a Cisco 1601 connected to a T1. The router is also set up to allo...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20307681.html
Zones:
RoutersDate Answered: 01/12/2003 Rating: 7.6 Views: 0
Hi,
We've got an internal 1601 cisco router with the config below. It is connected to 2 networks, 192.168.1.0 which is internal network and 192.168.10.0 which is external network.
The rout...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20389744.html
Zones:
RoutersDate Answered: 11/07/2002 Rating: 7.6 Views: 0
' This is not a working program.
' I want to set the value of "Internet Settings\Zones\3\1601" to 0x00000000 (0)
' Thanks
Private Declare Function RegCreateKey Lib "advapi32.dll" Alias "RegCre...
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/Q_20860396.html
Zones:
Visual BasicDate Answered: 01/23/2004 Rating: 9.4 Views: 0
Hello, I dug up a working Cisco 1601 R Router from my basement and I was wondering if there would be a way to use it as a ADSL router??? If so, what would I need to get for it (software, nic)?
...
http://www.experts-exchange.com/Networking/Misc/Q_21604234.html
Greets all....
I have cisco 1601 that has a t1 csu/dsu wic.
All I'm trying to do is define the timeslots for the interface.
(This is full T1, with all 24 slots)
My understanding for the com...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21648860.html
Zones:
RoutersDate Answered: 12/01/2005 Rating: 9.8 Views: 0
We have a 1601 Cisco Router that terminates our T1. The fastethernet card is only 10BaseT. How greatly does this afftect our performance?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22524604.html
Zones:
Routers,
N...Date Answered: 04/24/2007 Rating: 6.2 Views: 0
