I have no clue how to do this.
1.) Do you think I need to.
2.) What are the steps?
Thanks,
DLockwood
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20709824.html
Zones:
RoutersDate Answered: 08/14/2003 Grade: A Views: 0
I have a Cisco 1720 series router that I need to set up to bridge. Ntelos has ran a T1 line and I have a T1 WIC in my router. I am using a Sonic Wall TZ170 Firewall and creating a VPN tunnel to a r...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23132285.html
Compaq Deskpro 2000 gives bootup error message of imminent failure
http://www.experts-exchange.com/Hardware/Misc/Q_10265022.html
Zones:
HardwareDate Answered: 01/26/2000 Grade: B Views: 0
How do i connect from my PC (windows 2000) to a new cisco 1720 router ? in days of past, we used to use hyper terminal, however i don't see that as an option on my pc ? is there another way, so th...
http://www.experts-exchange.com/Hardware/Misc/Q_20190333.html
Zones:
HardwareDate Answered: 05/19/2002 Grade: A Views: 0
I am trying to change a Cisco 1720 configuration to allow access for an outside vendor to an application server that I just setup as a member server.
The main server is Windows 2000 Standard. ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20462090.html
Zones:
RoutersDate Answered: 04/24/2003 Grade: B Views: 0
I know a little about Cisco routers, but I'm stumped when it comes to this. I have a Cisco 1720 router, and it currently has a static IP that all the computers share (1 server and a few workstation...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20588695.html
Zones:
RoutersDate Answered: 07/07/2003 Grade: A Views: 0
We just had a 128K frame installed. I need to configure my Cisco 1720 w wic it and need some assistance. AT&T is handling security and will only allow the approprate IP's down the pipe. They are ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20975990.html
Zones:
RoutersDate Answered: 05/03/2004 Grade: A Views: 0
Config is below... I can ping www.cisco.com, DHCP interally works fine, but can't get pc's to route out ethernet 0... I need some help
Building configuration...
Current configuration : 984 ...
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_21110163.html
Zones:
DSL / CableDate Answered: 08/31/2004 Grade: B Views: 0
I am completely new to cisco 1720 i have a 1720 router can anyone tell me whether it is possible to managebthe router through the web browser if yes how i tried the ip of the router but it does not...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21194245.html
Hi,
Looking for a solution here. I have:
the global IPs .42 - .46
Cisco 1720 with a WIC and Fast Ethernet and an empty bay (Currently using a Free netopia on the network)
One available d-link...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21233495.html
Zones:
RoutersDate Answered: 01/01/2005 Grade: A Views: 0
