I would like to configure my cisco router to give Citrix priority over all other traffic on my interfaces.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21046253.html
Zones:
RoutersDate Answered: 04/11/2005 Grade: A Views: 0
Hi all,
I have a cisco 1760 with a wic1-adsl card serving our network
I know a little bit about the router, and what to do to make it work, but i am a butcher - the router was set up by a fri...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21435737.html
Zones:
RoutersDate Answered: 06/02/2005 Grade: A Views: 0
Anybody has experience with 1760 routers. How good they are? how good the used ones. I am trying to get a one that was used for a year from somebody. it has 32mb flash and 9x mb memory with one ye...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21676600.html
Zones:
RoutersDate Answered: 01/06/2006 Grade: A Views: 0
Hi All,
Kind of urgent question, and should be simple for someone that knows what they are doing :)
I have a Cisco 1760 that obviously will not run ADSL2+
Now, my solution for the customer...
http://www.experts-exchange.com/Networking/Misc/Q_21846152.html
Hi guys
i have a router 1760 . and recently i have faced a very strange problem that i have a Wic 2T card in it plugged and power up ...but i cant see it in the Show runn or sh ver command ...m...
http://www.experts-exchange.com/Networking/Misc/Q_22091545.html
Zones:
NetworkingDate Answered: 01/30/2007 Grade: A Views: 0
I have a Cisco 1760 Modular Router MFG# CISCO1760 .
I have installed a single 4 port FastEthernet switch MFG# WIC-4ESW=
Tonight I installed an additional 4 port FastEthernet switch.
The sw...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22435875.html
I have a cisco 1760 router that needs the ios uploaded to it. It was working but I did the "copy running config" command because I thought it would save my current config to the running config but ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23675222.html
I'm trying to get a cisco 1760 call manager express to work with a cisco call manager server. I'm getting the error message Call Manager Application is not enabled when I try to config mgcp. Any ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_23676163.html
Hello,
I have a Cisco 1760 router with 2 Ethernet Interfaces and 1 FastEthernet interface. I have E0/0 connected to a Cable Internec connection and I have E1/0 connected to an ADSL Internet Con...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20833470.html
Zones:
RoutersDate Answered: 02/03/2004 Grade: B Views: 8
I have a Cisco 1760 and I need it to Register to my SIP Server. the 1760 is behind a linksys using NAT.
so far this is what I configured for it, but its not registering.
sip-ua
sip-server i...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20849938.html
Zones:
RoutersDate Answered: 01/22/2004 Grade: B Views: 14
