I need to know the commands for adding a static ip address and DNS on a specific port on a Cisco 1800 Series router. I'm using redundant internet connections and want to coinfigure the spare WAN po...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22536371.html
Hi, im am after how I would map a range of ports, currently I use "ip nat inside source static tcp "internal IP" "port" "interface" "port", could you tell me how I map a range in one command, say 5...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23093586.html
Zones:
RoutersDate Answered: 01/18/2008 Grade: B Views: 0
I have a Cisco 1801 router. My ADSL ISP provide me a static IP address and a static /29 IP range. I would like to assign IP from range directly to my servers without NAT. But I also have need NAT f...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23235768.html
I have 2 Cisco 1800 serives that I need to configure a DMVPN Fully Meshed. I have had no luck, can anyone help? I have included the running configuration File for Both Routers below. I think I h...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23391752.htm...
Zones:
VPNDate Answered: 05/18/2008 Grade: B Views: 0
I have a Cisco 1800 series router and have attempted to setup port forwarding on it. I am able to access the services locally but not externally, I am able to surf through the router and telnet t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23445315.html
Zones:
RoutersDate Answered: 06/12/2008 Grade: B Views: 13
Hi Experts
I am starting on the CCNA study path and have obtained an 1841 series router. I need to install a Hwic1-Adsl interface in the router and have been told i will need an IOS version at a...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23571745.html
Zones:
RoutersDate Answered: 07/19/2008 Grade: A Views: 8
I want all the internal side to be on addresses -
10.0.2.0 - 10.0.2.255 with a 255.255.255.0 subnet
But I want everything from 10.0.2.2-10.0.2.192 to use FE0 for internet access.
and ever...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_23581540.html
I need to change DNS Servers that are in a Cisco 1800 Router. Can someone provide me a walk through or a link to information that can help me do this? Thanks.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23614958.html
Zones:
RoutersDate Answered: 08/01/2008 Grade: A Views: 18
Question about a NAT policy that i want to setup a ACL with. I have a list of ips that i want to allow for a specific nat rule inbound.
For example
I have a static nat entry for RDP
I want pub...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23077361.html
I currently have one location and they use a Cisco 1800 series firewall / VPN. I am going to open up a satelite or remote location mid February and need to communicate back to the main office and s...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23099974.htm...
