I have a Cisco 1811 that is hooked up to a DSL line. I would like to hookup the V.92 modem to a POTS line and allow it to be a backup of the DSL goes down. I want it to dial up my ISP with my dia...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23436181.html
Zones:
RoutersDate Answered: 06/03/2008 Grade: A Views: 4
How do I configure the Cisco router to pass through Microsoft VPN to the 192.168.1.5 server on the other side of the router? I used sdm to set up the router so Please try to respond with the sdm co...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23252393.htm...
Zones:
VPNDate Answered: 03/19/2008 Grade: A Views: 17
I am attempting to setup a cisco 1811 and am a nub when it comes to cisco's IOS. Something you don't want to hear from the guy working on your router..."can't I do that through the GUI?"
And I c...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21923752.html
Zones:
RoutersDate Answered: 09/12/2006 Grade: B Views: 0
Can I use the IOS c870-advipservicesk9-mz.124-11.T version from router CISCO 871 on a CISCO 1811?
Will I have any problem if I do this?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22124184.html
Zones:
RoutersDate Answered: 01/16/2007 Grade: A Views: 0
I have a Cisco 1811 Router that has a broadband connection comming in and a Linksys 24 switch behindm it, connected to the 8 port ob board switch. I also have 3 server connected to the onbeard swi...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22423006.html
Zones:
RoutersDate Answered: 03/12/2007 Grade: A Views: 5
I am trying to configure a Cisco 1811 ISO version 12.4 router to do load balancing between two cable modems via Ethernet. I am unsure the best way to go about it and understand if the modems are fe...
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_22571856.html
I am setting up a Cisco 1811 at a small office. Eventually I will have 3 PIX 501s VPN back to this router. This is the first 1800 series I have setup with DSL, so any help would be appreciated.
...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22777538.html
Trying to configure this router for basic internet access with DHCP and enable telnet access from the wan side. I am encountering 2 problems:
1) With the below config, the router has internet ac...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22792664.html
Hi,
I have a Cisco 1811 router with a t1 internet connection. I have the output of the bridge router from the t1 going to a dell switch the dell switch provides connections for the 1811 and the c...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22830345.html
Zones:
RoutersDate Answered: 10/16/2007 Grade: A Views: 0
Thank you in advance for any help. I am trying to allow a server from another network access to some of pc's on our local LAN. As it is now, we have access to servers on the other network. At fi...
http://www.experts-exchange.com/Networking/Misc/Q_23104737.html
