We are currently moving over from session.variables to client.variables because we are getting into load balancing. So we set up CF administrator to build the client storage tables... easy enough r...
http://www.experts-exchange.com/Software/Server_Software/Web_Servers/ColdFusion/Q_10322735...
Hi All,
I'm new to Cisco routers and therefore would like some assistance. Presently, I have 3 sites (1 HQ + 2 branches). The company has subscribed to 3 static plans and apparantly only HQ has ...
http://www.experts-exchange.com/Networking/Misc/Q_21693581.html
Zones:
NetworkingDate Answered: 02/01/2006 Grade: A Views: 0
... how do you nicely tell a customer that this is a bad idea! Seriously, are there any good references (even personal experience) as to NOT doing this in production.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22347967.html
Zones:
RoutersDate Answered: 03/05/2007 Grade: A Views: 0
I have a Cisco 1841. We purchased a wirless card for it and I installed it. The problem is that the card is not working whatsoever. I have tried both slots and nothing. The card is a HWIC-AP-G-A wh...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22684224.html
I have a cisco 1841 with a ADSL RJ11 Wic installed and 2 RJ45 connections, one is not used one is used to connect to the office LAN. I will be moving to NTL Broadband soon and want to continue to ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23301821.html
In my company I've got Cisco 1841 (192.168.2.10) configured as VPN Server connected to Linksys RV082 (192.168.2.0) on which I have my whole LAN I want to be able to access through Cisco VPN Client....
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23419237.htm...
Zones:
VPN,
RoutersDate Answered: 05/26/2008 Grade: A Views: 35
I am attempting to create/configure an Async interface using the Aux port on a Cisco 1841. I have input the command in config mode INTERFACE ASYNC1 among others ASYNC0, ASYNC0/1, etc. All result ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21485334.html
Zones:
RoutersDate Answered: 07/18/2005 Grade: A Views: 4
Cisco 1841 configuration.
I would like to add another subnet to my existing LAN to free up some addresses. I have a 192.168.0.x subnet and am trying to add a 192.168.2.x subnet. MY issue is that I...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21579017.html
Zones:
RoutersDate Answered: 10/24/2005 Grade: B Views: 8
I have a small business that is using a Cisco 1841 router and a Cisco PIX 506E firewall that only has one T-1 associated with it right now. I didn't program either of them and the company used to ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21585271.html
Zones:
RoutersDate Answered: 10/11/2005 Grade: A Views: 0
I have tried to get it connected to a second switch/ a vlaned switch/ and a server box, but I just can't seem to get the protocol on the port to read as up. What is the correct configuration to hav...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21696389.html
Zones:
RoutersDate Answered: 01/14/2006 Grade: A Views: 0
