hello
i have a FTP server working internally on the LAN.
i would like to be able to access it from the internet.
How do i go about configuring the NAT on the cisco 1841 router.
Public ip 00...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23531668.html
Hi Experts, I have a Cisco Pix 515E which I want to set up as an internet gateway for all P.C's. I currently have a Cisco 1841 for the adsl connection but I wiil set the Pix as a DMZ and it will ac...
http://www.experts-exchange.com/Networking/Misc/Q_21944153.html
I have a cisco 1841 integrated services router and want to give different ISP staic IPs to each VLAN. How do I go about doing this setup.
The problem is that I have all of the current NAT traff...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22678197.html
When I boot my router, it does not have any of my saved config. The config is in the CF card and I can even do a copy start run and all of the info is there. It just is not there in the running con...
http://www.experts-exchange.com/Networking/Network_Management/Q_23085733.html
Hi,
I have a cisco 1841 router that I am trying to setup VPN on. The VPN clients are Linksys BEFVP41 & BEFSX41 routers. I have tried both EasyVpn setup & plain old IOS commands. I am ex Cisco cert...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23617552.htm...
We have an 1841 Cisco router and using an external cable modem for internet connectivity.
what i would like help with is configuring the router to get internet across the network. I have set the...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23726754.html
Hi, I bought a cisco 1841 router and a sonicwall TZ170 firewall for 1 T1 and 1 DSL connection. How to configure it for load balancing. Thanks.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22649139.html
Zones:
RoutersDate Answered: 06/22/2007 Grade: A Views: 4
I currently have a point-to-point T1 connection connecting a satillite location to a main location. I'm using two CISCO 1841 routers with WIC-T1 cards in both. Currently they are configured in a ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22679377.html
Zones:
RoutersDate Answered: 07/13/2007 Grade: A Views: 0
Hi,
I have a 1841 with a new added HWIC-4ESW. FE0/0 connects to LAN, FE0/1 connects to T1 router, FE0/0/0(VLAN1) connects to DSL router. T1 works fine. But DSL line doesn't work. I plan to use t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22743263.html
Zones:
RoutersDate Answered: 08/12/2007 Grade: A Views: 0
Hello,
I have a cisco 1841 router with 2 interfaces.
interface 0/0 - Conected to ISP
Interface 0/1 - Private IP 10.21.10.3
I Then have an ASA with an external interface 10.21.10.1 which con...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22807389.html
