Advertisement

1 - 10 of 17 containing alltags:("2420") (0.001 seconds)
We have a HP 2420 (on lpt port ) connected to server 2003 sbs.  There are about 15 workstations (XP) .  At least once or twice a day people will try to print and nothing happens.  You look at the p...
Zones: PrintersDate Answered: 07/01/2006 Grade: A Views: 42
Need to put a LJ 2420 on the network.  Which jet direct do I need to get?  Does it matter?
Zones: HP PrintersDate Answered: 08/01/2005 Grade: A Views: 0
I am trying to print on two sides of card stock with HP laserjet 2420 printer.  The first side prints great.  When i flip them over to print the second side, the first card prints fine but subseque...
Zones: PrintersDate Answered: 12/05/2005 Grade: A Views: 0
I'm trying to print to a printer, my previous example can do that without any issue.  Now I have been trying to add in the ability to pass arguments from the command line, etc.  When I run it this ...
Zones: JavaDate Answered: 10/04/2006 Grade: A Views: 0
I have a printing question that I am struggling with at the moment.  I just replaced an old printer that died with a new one (HP Laserjet 2420).  I kept the NDS queue and printer objects intact fro...
Zones: NetwareDate Answered: 11/10/2006 Grade: A Views: 0
We have a LAN with the following current topology: SERVER cabinet -->3x PowerConnect switches on cabinet-->patch panel-->25x workstations << all CAT5e>> (building A)                            ...
Zones: Network Design & Methodology, Network...Date Answered: 05/19/2008 Grade: A Views: 0
I have a client that has a Laserjet that is printing solid black along the left side of a page.  I had him change the toner cartridge just to see if that was the problem, but nothing has changed.  ...
Zones: HP Printers, Printers, PeripheralsDate Answered: 10/24/2008 Grade: A Views: 18
Our Mas90 software prints a transaction register when you update but, it only prints once and you can't go back in and print another.  however the job hanged because a previous job errored and she ...
Zones: PrintersDate Answered: 01/09/2008 Grade: A Views: 0
I have recently acquired an old packard bell 2420. It runs great. Seems very stable. I would like to know if it is worth it to upgrade it or am I better off leaving it alone. I am a beginner, but w...
Zones: General SystemsDate Answered: 02/14/2004 Grade: A Views: 0
`I am looking to replace my 6P  with the  HP LaserJet 2420 , but I need to know if it can print from dos, and if not, what is an HP printer I can buy that can ? Thanks
Zones: PrintersDate Answered: 05/15/2006 Grade: A Views: 0