Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 553(0.001 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

6.2
how do i download the config file from a cisco 2600 series router thru serial port using vb?
Zones: RoutersDate Answered: 03/22/2003 Views: 0
i have 2 routers and an adsl connection. one of the routers is a vigor 2600. the other is another adsl router. what i want to do is connect them together so i have 2 'seperate' networks, but share ...
Zones: Networking, Networking Hardware, FTPDate Answered: 11/20/2004 Views: 0
Hi experts, i have a cisco 2621 router which i need to join together two subnets, namely 172.24.174.0 and 172.24.240.0     i configured one fe 0/0 interface 172.24.174.3 one one subnet, the othe...
Zones: Networking, Hardware Firewalls, FTPDate Answered: 12/08/2005 Views: 0
Hi Experts, Here's the situation. I have a router which is a 2500 Router and I am trying to update the IOS however, I am having some trouble. I have two ways in which I can get into the 2500 Rou...
Zones: RoutersDate Answered: 08/03/2006 Views: 0
My network feed from the telephone company comes in on a rj45 end.  The cisco 2600 router has only one rj45 plug and two serial interfaces for dce/dte ends.  Is it possible to get wics for this rou...
Zones: RoutersDate Answered: 05/09/2007 Views: 0
I am having problems getting a Cisco VPN to work properly. This is pretty much the same configuration I have used in the past, except that the local subnet is different. When I establish a connecti...
Zones: VPNDate Answered: 02/07/2008 Views: 5
Hello. I manage a site that has a T1 Point-To-Point connection with 2600 series Cisco's at both ends. It seems like exactly 29 days ago we had the same problem we had today, where roughly around...
Zones: Routers, Network analysis Software, Network Operati...Date Answered: 11/11/2008 Views: 0
I have a failed drive on a RAID 5 with a second drive indicating it is at risk. I have the server shut down currently. I ordered 2 drives O/nite from Dell on weds but they say they are in stock ...
Zones: Servers, Hard Drives, ...Date Answered: 12/05/2008 Views: 4
Hi, is it possible to do a sort of bandwidth management on a cisco 2600 router? Let me explain. I have 2 host behind a 2600 router (connected via the ethernet adaptor). The other side of the ...
Zones: RoutersDate Answered: 02/02/2003 Views: 0
http://www.experts-exchange.com/Hardware/Q_20455984.html please help me in this.. its kinda urgent
Zones: Linux AdminDate Answered: 03/09/2003 Views: 0