I have two access control lists; one configured on the serial interface "in" and the other configured on the serial interface "out". The log messages from the inbound traffic show the originating ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20509767.html
Zones:
RoutersDate Answered: 03/21/2003 Rating: 7.0 Views: 0
I have a 2610 router with a 10mb ethernet on it already. I want to add an additional ethernet port. Is this possible, or will I need to remove the current module? (I think it's a module thats in t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21470914.html
Zones:
RoutersDate Answered: 06/25/2005 Rating: 9.0 Views: 0
I am trying to standardize QoS for VoIP on a Cisco 2610.
I have seen some of our equipment out there configured with policy maps like this:
policy-map voice-priority
class voice
priori...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23290316...
I had a 2610 router with one WIC1T card and a Network module card with 8 ports(NM/8). I had connected one port to my ISP and 4 other ports to other parts of my city. The bandwidth i got from m...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20243566.html
Zones:
RoutersDate Answered: 02/15/2003 Rating: 9.0 Views: 0
Hi experts,
We have an old Cisco 2509A with 4 modems connected to it that is starting to fail. We have now bought a new cisco 2610 with the 8AM module. When I compare these two routers the old o...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20276256.html
Zones:
RoutersDate Answered: 05/27/2002 Rating: 7.4 Views: 9
This is a multiple part question.
1. What is the difference between c2600-blah-122-19.bin and c2600-blah-123.1a.bin?
2. I have never done an IOS upgrade before, any hints or maybe detailed i...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20741819.html
Zones:
RoutersDate Answered: 09/27/2003 Rating: 9.0 Views: 0
I am having several issues with VoIP on my Cisco 2610 router, is there any know issues/bugs with VoIP on this router? If so, can you provide me with a link?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21292878.html
Zones:
RoutersDate Answered: 06/16/2005 Rating: 8.6 Views: 0
We have a customer with Cisco 2610 based Frame Relay network. We are about to set up voip over this network in a test, and have some configuration questions. The routers were installed years ago ...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21547206...
Zones:
VoIP,
SSIDate Answered: 09/02/2005 Rating: 9.4 Views: 0
I need some authoritative answers regarding this hardware. I have been told all kinds of stuff about this, but I haven't heard a concrete answer to this question yet.
I have a 2610 router, which...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21571802.html
Zones:
RoutersDate Answered: 03/09/2006 Rating: 9.0 Views: 0
We have an office connected to a full T-1 via the serial port on the 2610. We're needing increased bandwidth, so we're thinking to add a fat DSL connection to the router via an ethernet module. W...
http://www.experts-exchange.com/Networking/Misc/Q_21944001.html
