I have a Cisco 2611 that does not have SDM, is it still possible to set this device up as an easy VPN server via telnet?
If so how?
Thanks
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_23698975.html
Thanks for looking at my questions.
Was doing more research on our Cisco 2611 and stumbled across data compression and have a few questions about it.
First, I have a T1 and move quite a bit of ...
http://www.experts-exchange.com/Hardware/Misc/Q_20490673.html
Zones:
HardwareDate Answered: 02/01/2003 Grade: A Views: 0
Hello!
I've been struggling with a routing problem. I'm not a Cisco specialist, and have a very rudimentary understanding of routing.
I've got a Cisco 2611 with IOS 12.3(3a), which has 2 Ethe...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21259025.html
Zones:
RoutersDate Answered: 03/09/2006 Grade: A Views: 0
i cant for the life of me figure out why this doesnt work. i have a Cisco 2611 connected to a cable modem. i can ping the gateway provided by the ISP but no other address outside of my local networ...
http://www.experts-exchange.com/Networking/Misc/Q_21270454.html
I need to limit bandwith to a specific host on the internet and allow all other traffic. How can I best accomplish this with our existing 2611?
http://www.experts-exchange.com/Networking/Misc/Q_21380355.html
Zones:
NetworkingDate Answered: 07/02/2005 Grade: A Views: 0
Our New ISP has delivered access to our company via a CISCO 1700 (used to provide service to multiple customers) and we have a 64 address range (62 usable). We will need to be able to use all 62 a...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21700099.html
Zones:
RoutersDate Answered: 01/17/2006 Grade: A Views: 0
How can I check / modify the mail route on a CISCO 2611 T1? We installed a Barracuda Spam Firewall (BSF) but not all of our mail is passing through the BSF. We are running Exchange Server 2003 al...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21945774.html
Zones:
RoutersDate Answered: 09/14/2006 Grade: A Views: 0
We have a Cisco 2611 XM not routing. It has two built in fast ethernet ports and nothing else added. I can HTTP to it from the LAN side and from its' command line can ping my PC and the COs Adtr...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22107948.html
Zones:
RoutersDate Answered: 01/08/2007 Grade: A Views: 0
Newbie here!
Let me start by saying I don't have any Cisco training so I'll need to KISS (Keep it simple stupid).
My 2611 is configured as a DHCP server for my network. I would like to remove th...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23426386.html
Zones:
RoutersDate Answered: 05/22/2008 Grade: A Views: 0
What commands would I have to run to forward all FTP traffic to an internal IP. Right now all of my boxes are DHCP from the 2611 but I don't mind running a internal static address on the box with ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23067945.html
Zones:
RoutersDate Answered: 01/09/2008 Grade: A Views: 0
