Site A has a Cisco 2620 with 2 Serial Interfaces, and 2 Ethernet Interfaces-the config is as follows:
Current configuration : 3185 bytes
!
version 12.3
service timestamps debug datetime msec
...
http://www.experts-exchange.com/Networking/Misc/Q_21407604.html
I have a medical group that has six sites. They want to install point to point t-1's at each site. Can I use 2 cisco 2620 routers for this or will I need to use a cisco 3640. This will be set up ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20520582.html
Zones:
RoutersDate Answered: 06/22/2003 Grade: A Views: 0
I would like to set up my 2620 to accept VPN connections from a machine on a dial up connection. Is this possible or do I need a dedicated VPN box? Thanks in advance!
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20617579.html
Zones:
RoutersDate Answered: 05/15/2003 Grade: A Views: 0
I have a Cisco 2620 with a T1 CSU/DSU WIC.
I want to the router to function just as basic internet sharing for now.
So i want to following
Outside
T1 configured for 5 ip addresses - ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20669457.html
Zones:
RoutersDate Answered: 07/08/2003 Grade: A Views: 4
Hello,
Here is the version and configuration of our router:
IOS (tm) C2600 Software (C2600-IO3S56I-M), Version 12.1(17), RELEASE SOFTWARE (f
c1)
Copyright (c) 1986-2002 by cisco Systems, Inc....
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20787438.html
Zones:
RoutersDate Answered: 11/07/2003 Grade: C Views: 0
Hello,
The basic idea is that I would like to use the Cisco 2620 router to provide QoS on the DSL line I have. My ISP has allocated me static IPs of x.x.x.129-x.x.x.133 (5 IPs) with a subnet of...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21039399.html
Zones:
RoutersDate Answered: 06/28/2004 Grade: A Views: 0
i need to do some unusual NAT configuration. i have gigabit internal with servers that can deal with the bandwidth relatively easily. because of this, i have two DSL feeds, round robin DNS to both ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21066705.html
Zones:
RoutersDate Answered: 09/01/2004 Grade: A Views: 0
There are two subnets on the inside of the 2620, for two separate domains. Each of the domains has its own mailserver, each of which has (obviously) an internal IP address and each of which has (p...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21140509.html
Zones:
RoutersDate Answered: 09/22/2004 Grade: A Views: 0
We're getting a new full T1 next week and I'm getting ready to change the config. Is there anything that needs to be changed when going from a burstable t1 to a full?
Also, is it necessary to...
http://www.experts-exchange.com/Networking/Misc/Q_21212892.html
Is there a way to monitor or watch the traffic that comes through a cisco 2620? I saw a consultant do it where I used to work but he wouldn't show me how. BOO!
Thanks in advance!
http://www.experts-exchange.com/Networking/Misc/Q_21218479.html
Zones:
NetworkingDate Answered: 11/25/2004 Grade: A Views: 0
