I have a cisco 2621 xm with two fixed Fastethernet ports. ver 12.3(6)
F 0/0 is configured with 66.210.210.2
F 0/1 is configured with 10.10.10.1
my gateway of last resort is 66.210.210.1 (which...
http://www.experts-exchange.com/Networking/Misc/Q_21034314.html
I have a static, 5 IP dsl service though SBC that requires a username and password to connect to there CO. I wanted to run the dsl direct in to my 2621 that I currently have connected thru fa0/0 t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21339022.html
Zones:
RoutersDate Answered: 03/05/2005 Grade: A Views: 0
hi, a small question...
after 'copy run start' and 'reload', everything I configured before is gone...
such as the hostname is back to 'Router'.
how to fix it?
thanks.
-R
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21838903.html
Zones:
RoutersDate Answered: 05/04/2006 Grade: A Views: 0
To All who reply, TIA!
Here is the situation:
I have a 2621 Cisco Router. I have FA0/0 Connected directly to a cable modem, the FA0/1 is connected to a Switch . My ISP assigns me IPs Via DHC...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20590247.html
Zones:
RoutersDate Answered: 04/19/2003 Grade: A Views: 4
I must be leaving something out, heres how I configure this, but nat isnt working
Configuration summary
FE 0/0 :
Ip 192.168.1.1
Ip 192.168.0.1 secondary
ip nat inside
ATM 0/0.1
Ip (a...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21108399.html
Zones:
RoutersDate Answered: 08/26/2004 Grade: A Views: 0
Background -- During our network revamping, I aquired a Cisco 2621 for our lab. Looking over the configuration, I noticed it was running a 10.x IOS and some really messed up VPN configuration. Af...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21190569.html
Zones:
RoutersDate Answered: 11/02/2004 Grade: A Views: 32
Hello, I have a cisco 2621 router and have always configured the system in the following way and it works well. Now i have to make some changes on my network I will have to have a T1 line coming...
http://www.experts-exchange.com/Networking/Misc/Q_21640225.html
Zones:
NetworkingDate Answered: 04/28/2006 Grade: A Views: 0
Hi, I have a router question:
our company internal LAN is 10.10.10.0/24, workstation with
10.10.10.x
255.255.255.0
10.10.10.1 --- gateway
DNS: 10.10.10.4 ---DNS server ip address
could b...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21842439.html
Zones:
RoutersDate Answered: 05/19/2006 Grade: B Views: 0
HI guys
I HAVE A CISCO 2621 with two eathernet .... it arrived me when it was in ROOMON Mode .
and now when i do tftpdnld ... it start downloading the file and says ...File Reception is complet...
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_22515465.html
Hi,
I have 2 T1's, one of which is dedicated for Internet traffic, traffic is split using static routes.
I have a small base of people that use a third party hosted app through Citrix, about ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23255258.html
Zones:
RoutersDate Answered: 03/21/2008 Grade: A Views: 0
