I have a Thinkpad 2626-cou that the owner has tried to replace the HD with a Toshiba 20 GIG HDD ...
He is not able to read nor access the HDD or the CD. My first thought (over the phone) was to...
http://www.experts-exchange.com/Storage/Misc/Q_20793744.html
I have attempted to set up my HP Procurve 2626 to block all mac addresses but the ones I have specified through the following commands.
port-security 2 learn-mode static address-limit 3 action s...
http://www.experts-exchange.com/Security/Operating_Systems_Security/Windows/Q_21106855.htm...
Is there an easy way to display a switching table? I need to map each port of our switches. Instead of tracing wires around using a cable testing device, I thought there may be a way to get MAC add...
http://www.experts-exchange.com/Networking/Misc/Q_21109895.html
Zones:
NetworkingDate Answered: 08/30/2004 Grade: B Views: 0
i am using cisco router for routing, and HP 2626 switch for VLAN
======================================================
Cisco Router
interface Ethernet0
ip address 10.10.1.1 255.255.255....
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21651374.html
Zones:
RoutersDate Answered: 12/02/2005 Grade: A Views: 29
i am using cisco router for routing, and HP 2626 switch for VLAN
======================================================
Cisco Router
interface Ethernet0
ip address 10.10.1.1 255.255.255....
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21651506.html
Zones:
RoutersDate Answered: 05/25/2006 Grade: A Views: 0
This may be really stupid, but I can't get any kind of terminal emulation software to work properly to set up my new procurve 2626. I tried hyperterm, it says it connects but I get nothing on the ...
http://www.experts-exchange.com/Networking/Misc/Q_21990373.html
Zones:
NetworkingDate Answered: 09/15/2006 Grade: A Views: 60
Procurve 2626 switch.
I used the following command to allow access to a switch port 2 only from one MAC-address.
ProCurve Switch 2626(config)# port-security 2 learn-mode static action send-di...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23349971.html
need to know how to bypass pass code for bios, says my mother board isint set up. Then when it comes to loading which program.it says go to step by step config. and put in scanreg., also says miss...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/98/Q_20564624.html
Zones:
Windows 98Date Answered: 07/23/2003 Grade: A Views: 0
i have HP servers with HP procurve 2626 switch
i have subnet of 192.168.1.1
my network has POS machines, and Office LAN PC's
i want to seprate POS and LAN PC's, meaning POS machines there ...
http://www.experts-exchange.com/Networking/Windows_Networking/Q_21639184.html
i am using cisco router for routing, and HP 2626 switch for VLAN
======================================================
Cisco Router
interface Ethernet0
ip address 10.10.1.1 255.255.255....
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21651100.html
Zones:
RoutersDate Answered: 12/02/2005 Grade: A Views: 0
