I have a cisco router 2800 series. We moved to a new office and we purchased a new router and we use that one now. Now I want to use the old router in my network for a different function. But I ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23076843.html
Zones:
RoutersDate Answered: 01/18/2008 Grade: A Views: 4
We have a 2800 series router, a PIX 506, and 2 internet connections. One is an inbound T1 that comes into the router and then heads for the PIX, then our internal network. We have a new connection ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23097524.html
I recently purchased Solarwinds Orion SNMP manager. I currently manage 7 2800 series routers and I would like to monitor their CPU utilization. After researching Cisco's site I found some files I c...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23099598.html
Zones:
RoutersDate Answered: 01/22/2008 Grade: B Views: 24
I have been told by my telecommunication company that they are seeing a lot of butter overruns from my router. I like to know what I need to do to get this resolved.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23717840.html
Zones:
RoutersDate Answered: 09/24/2008 Grade: B Views: 0
I have a Cisco 2811 running MLFR for 2xT1 to the internet and want to allow video conferencing traffic to get top priority (20% of the 3 MB total). All video traffic originates from 125.223.85.176...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23760511.html
Zones:
Routers,
TCP/IPDate Answered: 09/25/2008 Grade: B Views: 29
After reading Ciscos product sheets I have the following questions:
1) In the 2800 higher end routers are two gigabit ports. Will that router route at gigabit speeds between those ports with let...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_23462300.html
Hi Guys,
I was changing our network cables today unfortunately i unplug our cisco 2800 series router which we use for VOIP telephony later i observed that i have put them in the wrong order beca...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Cables/Q_23096052.html
Hello,
I'm working with a cisco 2800 series router, It's plugerd into a new T1 line, and I need to put in the config info for the switch. I have a configuration in a txt file, but not too sure ho...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23470662.html
Zones:
RoutersDate Answered: 06/10/2008 Grade: A Views: 25
I need to get my router on our POTS line to have an engineer remote in and configure. Anyone know the best way to do this? Router came with a modem cable, I'm going to have to scrounge around and...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23480474.html
Zones:
RoutersDate Answered: 06/20/2008 Grade: A Views: 6
Hi,
I was working on setting NAT up on my 2811, through the CLI, and created an interface named "NVIO", which seems to be getting in the way of traffic. IT was created in the fa0/1 interface conf...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23508969.html
Zones:
RoutersDate Answered: 06/23/2008 Grade: A Views: 29
