When I boot this Sun280r it only gets as far as shown below. It's connected to a Lightwave console so possibly some eeprom command changes the display. I even pulled all the hard drives to see what...
http://www.experts-exchange.com/OS/Unix/Solaris/Q_22949010.html
Zones:
Solaris UnixDate Answered: 11/19/2007 Rating: 7.8 Views: 0
Hi,
I just bought a sunfire 280R from ebay. It did not come with video card. I got the video card from the other sunfire 280 which is working fine. So, I plugged that video card into the sunfire 2...
http://www.experts-exchange.com/OS/Unix/Solaris/Sun_JDS/Q_22844399.html
I have sun fire 280 R machine, have no xvr for display, just using serial console for accessing. I have problem for login to the alom. the alom always ask "please login" but i have no password, b...
http://www.experts-exchange.com/OS/Unix/Solaris/Q_24053581.html
Hi,
I recently brought a ***second hand*** sun 280r box from ebay, and I realize one of the box is running sun 5.8 which is real old.
I start this box with no ac key and rsc password. N...
http://www.experts-exchange.com/OS/Unix/Setup/Q_24509104.html
I have one SUNFire 280R using PGX64 cannot sync with my APC9278 KVM (with monitor). While I have copy the setting (fbconfig as well as m64config) from other server with exactly the same config whic...
http://www.experts-exchange.com/OS/Unix/Solaris/Q_24806521.html
Hi,
We Have SunFire280R. Old Administrator Installed Solaris 9 in this machine with only Core Distribution with some other packges.
My question is ...
Shall I get the same Performa...
http://www.experts-exchange.com/OS/Unix/Solaris/Q_20769988.html
Zones:
Solaris UnixDate Answered: 04/17/2004 Rating: 7.8 Views: 0
Goodday
i have just gotten a sunfire 280R and i think its it solaris that is installed because after booting i see the ok> prompt. My question is how can i install windows server 2003 on this mach...
http://www.experts-exchange.com/OS/Miscellaneous/Q_21476458.html
Hello,
Just wondering if anyone knew the console adapter needed for a 280R server? It's 25 pin, but wasn't sure about DCE or DTE.
Also for the RJ45 console ports is there any documentation o...
http://www.experts-exchange.com/OS/Unix/Solaris/Q_21489964.html
Zones:
Solaris UnixDate Answered: 07/13/2005 Rating: 8.8 Views: 0
In multi user mode I can power down my SUN Fire 280r with the command:
shutdown -g0 -i5 -y
But in maintenance mode that command does not power down the system. Is there a command I can use in mai...
http://www.experts-exchange.com/OS/Unix/Solaris/Q_22531531.html
Zones:
Solaris UnixDate Answered: 04/26/2007 Rating: 7.8 Views: 0
Have a sunfire 280r no longer supported but running archive data for company. power was pulled during a ups changeout and the system will not boot back up. Comes up and says unable to repair the /...
http://www.experts-exchange.com/OS/Unix/Q_22928095.html
