We are about to buy a Cisco 2811 router to connect with two (maybe three) AT&T T1 internet lines. Is there a way to configure this router and have the lines provisioned so that all T1s act as a si...
http://www.experts-exchange.com/Networking/Misc/Q_21813665.html
Does anyone know a way to erase a single file from flash memory on a Cisco router? I can use the "erase flash" command, but that's an all or nothing thing. It erases everything that's in flash.
...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23065371.html
Just set up a new 2811 with an e1. I can dial out from the router, however it wont take calls. Here is the q931 err i am getting can you help??:
Nov 6 04:30:18.355: ISDN Se0/0/0:15 Q931: RX <- ...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23880523...
I have a Cisco 2811 router. I have 2 enties in the NAT section:
1 for SMTP (port 25) from external address *.*.*.225 to our mail server (internal)
2. for VPN (port 1723) from external address *...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23065964.html
HI
I have cisco 2811 router. I am running server 2003 ent edition domain. Our security company has asked me that they want an extra internal network line with ports ports 69, 3060-3066 tcp only ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23202015.html
I have a Cisco 2811 running ios 12.3(8)T7
We've been running a single t1 on it for years, we've just decided to upgrade to 2 t1s and picked up a 2 port wic. The wic didn't light up as expected ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23350731.html
I am currently trying to trouble shoot some network issues we are having, but I am finding out my company had basically no network monitoring software set up so I'm basically working on guess work....
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23689336.html
Zones:
RoutersDate Answered: 11/16/2008 Grade: A Views: 11
Hi, I am able to successfully connect remotely to a Cisco 2811 via Cisco Client VPN. However, I am not able to access any of the PCs on the LAN behind the router. Here is my config. Thank you very ...
http://www.experts-exchange.com/Networking/Misc/Q_21229574.html
Well I'm back. I have a 2811 that I'm using strictly to provide internet access to a couple hundred users. I want to limit each user to 256Kb of bandwidth. My setup is a little complicated, but I t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21733347.html
Zones:
RoutersDate Answered: 02/12/2006 Grade: A Views: 0
I have a site-to-site IPsec tunnel (LAN-LAN) running from site A to site B. The equipment is two cisco 2811 routers. I need to add a site-to-site tunnel from site A to site C and maintain this alre...
http://www.experts-exchange.com/Networking/Misc/Q_21816039.html
