Well I'm back. I have a 2811 that I'm using strictly to provide internet access to a couple hundred users. I want to limit each user to 256Kb of bandwidth. My setup is a little complicated, but I t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21733347.html
Zones:
RoutersDate Answered: 02/12/2006 Rating: 7.4 Views: 0
I have a Cisco 2811 router. I have 2 enties in the NAT section:
1 for SMTP (port 25) from external address *.*.*.225 to our mail server (internal)
2. for VPN (port 1723) from external address *...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23065964.html
HI
I have cisco 2811 router. I am running server 2003 ent edition domain. Our security company has asked me that they want an extra internal network line with ports ports 69, 3060-3066 tcp only ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23202015.html
I am currently trying to trouble shoot some network issues we are having, but I am finding out my company had basically no network monitoring software set up so I'm basically working on guess work....
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23689336.html
Zones:
RoutersDate Answered: 11/16/2008 Rating: 9.1 Views: 37
I have a pair of Cisco 2811 routers. I am trying to achieve a couple things. I need to replace my 3810 routers that connect two sites via private T1 line. I also want to use one of the routers in m...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23759814.html
Zones:
RoutersDate Answered: 09/29/2008 Rating: 8.7 Views: 0
I am trying to successfully utilize two internet connections for two separate VLAN's on my Cisco 2811 router and 2950 switch.
Physical Configuration:
Cable Modem > fa0/0 on Router > fa0/1.1 on ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23906736.html
I have a Cisco 2811 with a Cisco 3640. Both are doing GLBP for my Load Balancing and Fail Over. These 2 routers are connected to my Catalyst 2970 24-port Gigabit. Port 1 is my 2811 router and po...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21615840.html
Zones:
RoutersDate Answered: 11/01/2005 Rating: 6.8 Views: 0
This is the first time I will install a router with 2 T1s bonded using CHANNEL-GROUP. But from other articles I have found, everyone seems to have 2 IPs to assign to each Serial interface. This i...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21617964.html
Zones:
RoutersDate Answered: 11/04/2005 Rating: 9.4 Views: 0
Hi all
I am running domain 2003 ent edition. A security machine at one of my locations was caught abusing another host machine somewhere else. On the router I have mapped the local address of th...
http://www.experts-exchange.com/Networking/Misc/Q_21940547.html
Hi
I have a cisco 2811 router that I wanted to reconfigure. When I try to connect using console it showing either JJJJJJ or CCC I have set COM1 as 9600, 8,N,1,N
if I use that setting to connect i...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21998607.html
Zones:
RoutersDate Answered: 09/24/2006 Rating: 8.2 Views: 4
