I would like to know how to clear the memory of a 2900XL switch totally. Thanks
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20256519.html
Zones:
RoutersDate Answered: 01/22/2002 Grade: B Views: 0
Hello,
I wiped the flash on a 2900XL to upgrade it to the same IOS we use on our other Catalysts and need to restore the HTML. What's the best way to go about this?
Thanks,
LMar
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21466255.html
Zones:
RoutersDate Answered: 06/21/2005 Grade: B Views: 0
is there any way to tell how much bandwidth is being used on a catalyst 2900xl per connection?
For some reason once a day we get this huge increase in bandwidth usage at a strange time, its about ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20752217.html
Zones:
RoutersDate Answered: 09/29/2003 Grade: A Views: 0
I have 3 Cisco 2900XL 10/100 switches that were set up before me and I think I might be having problems with it.
The environment is 4 NT4.0 servers and Win98 workstations. I just added a Compaq...
http://www.experts-exchange.com/Networking/Misc/Q_20988905.html
I'm very new to setting up switchs but I do understand the concepts of gateways, routers, switches, ect. I know how it's suppose to work, but I have no idea how to configure these things. This is...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21847791.html
Zones:
RoutersDate Answered: 05/23/2006 Grade: A Views: 0
hi,
I got a Cisco switch 2900XL that has no OS on it. The only file/foler I see in the flash is HTML. Can anyone walk me through loading an OS on the switch?
Thanks
http://www.experts-exchange.com/OS/Miscellaneous/Q_20453327.html
I want to set up a trunk connection between a 2900xl and a 2948G ( **NOT** a 2948G-L3)
a simple trunk connection for several different vlans
not routing
just switching
thanks
http://www.experts-exchange.com/Networking/Misc/Q_20715091.html
Good Day,
I'm trying to set up a cisco 2900xl for telnet.
I created vlan 253 and assigned it an IP. Set default gateway and nameserver. Configured vty with password.
My problem is that I c...
http://www.experts-exchange.com/Networking/Misc/Q_21266000.html
I am tryign to set up a cisco 2900xl and everytime I use cammand I get the following:
powerupswt#set vlan
^
% Invalid input detected at '^' marker.
I am connected by serial r...
http://www.experts-exchange.com/Networking/Misc/Q_21961054.html
Hello,
I set up a catalyst 2900xl with an IP address subnet and gateway. These are the only configuration I made. I would liek to use the switch on a different network as a regular switch. Ho...
http://www.experts-exchange.com/Networking/Misc/Q_21962387.html
Zones:
NetworkingDate Answered: 08/21/2006 Grade: A Views: 44
