Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 476(0 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

9.6
I have one 24 port Catalyst 2950 switch.   Currently, only around 12 ports are being used on it.  Additionally, right above that switch in our rack, is an old FastHub 400 which I would like to get ...
Zones: RoutersDate Answered: 10/18/2004 Views: 0
i have a cisco 2950 switch with a bad port.  cisco sent me a new switch, is there a way to export the config info from the old switch and import it to the new switch?
Zones: RoutersDate Answered: 03/09/2006 Views: 0
Hi,         I have to two switches which are connected for redundancy  both are running Spanning Tree. One switch is a 3500, and the other is a 2950. Currently the 2950 Switch is the root. The s...
Zones: RoutersDate Answered: 05/16/2006 Views: 0
I have a computer plugged into port 4 on a Cisco 2950, the router is plugged into port 1 on the Cisco 2950. What I want is that computer plugged into port 4 to only be able to talk to the router...
Zones: Networking, Network Operations, Ap...Date Answered: 08/09/2006 Views: 0
Using switchport port-security we can restrict input to an interface. I would like to restrict output to an interface. Is that possible? In fact I have a device connected to the switch interface ...
Zones: RoutersDate Answered: 01/07/2007 Views: 0
I need to reset my 2950 catalyst switch..to factory default..I have tried the instruction from  cisco website but it is going back to orignal config..please assist
Zones: Switches / HubsDate Answered: 10/16/2008 Views: 213
I have Cisco 2950Xl switches installed on my network and my networking is running both TCP/IP & IPX/SPX. When a system is turned on the netware login request timed out but ip works fine. I have tri...
Zones: RoutersDate Answered: 03/02/2003 Views: 0
Hi, I've got a new 2950, but I can't get it to go into our main cluster. From the new switch, I can see the main switch in cdp neighbours, but not the other way round. Neither can ping the ot...
Zones: RoutersDate Answered: 11/25/2004 Views: 0
Probably a very simple question, but i can't find the answer. Is there a limit to how many cisco 2950 switches can be daisy chained together using the GBIC ports? (In a loop so spanning tree kicks...
Zones: Networking, Networking HardwareDate Answered: 02/11/2005 Views: 0
Hi,     I have around 200 Desktops & 40 servers on my network using Cisco 2950 & Cisco 3750 switches. Need to monitor the network as which node or machine is generating traffic, Broadcast, collisi...
Zones: Networking, Switches / Hubs, Network Auditin...Date Answered: 06/18/2005 Views: 0