It is not called out in the switch documentation and I do not see IP routing commands for it either. A coworker believes that it is supported...so I thought I would ask.
If not, does anyone hav...
http://www.experts-exchange.com/Networking/Misc/Q_21944039.html
Zones:
NetworkingDate Answered: 08/09/2006 Grade: A Views: 0
Hi,
I need to segment the company LAN with 3 additional VLANs on my core (Cisco 3750) switches, VLAN301, VLAN302 and VLAN302, respectively Server's VLAN, workstation's VLAN and Printers' VLAN. I...
http://www.experts-exchange.com/Networking/Misc/Q_22155200.html
hi i have two subets on the same physical lan. They are conected by a fibre cable and all is hooked up and working.Now the situation has a arise that i need to pass traffic between these subnets. I...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22773751.html
i want to connect my second NIC card on my file server (win2003) and have it attached to port 18. Currently the first NIC card is connected to this cisco switch port 17.
is it possible to combi...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23070921.html
We have just purchased a Cisco Catalyst 2960g switch and I need to configure some vlans for its use. We currently have a 12 port 3500 XL that is configured similar to what i need below. I need the ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23146260.html
Hi there
Can anyone help me configure a Cisco 2960 to connect to a Cisco 3750 via an LC fibre connector. I need the vlans on the exisitng 3750 switch - vlan 99,100,110,120 to work with the new s...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23160173.html
I have several W2K3 boxes connected to a Cisco 2960. Since configuring the servers to run as NIC Teaming, I've been getting tons of messages stating:
flapping between port Gi0/8 and port Gi0/7
...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23456398.html
How can I login to a Cisco Catalyst 2960G switch and check if it has bad ports?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23703074.html
I have a Cisco 6509 switch at our core with existing VLans. I have created a new vlan to connect to a Cisco Catalyst 2960G swicth. I have everything configured properly on the 6509, but I can not...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23719478.html
Our main switch is a Cisco 2960G-48TC. Connected to it via fiber are four Cisco 2960G-24TC switches. Due to expansion, we added a second Cisco 2960G-48TC next to the main switch. The vendor that...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23809803.html
