Hello gentlemen, ladies:
I have a question that may be kind of basic but I am also very new to cisco equipment so here it is:
I have a couple of CISCO Catalyst 3550 one is configured for, let...
http://www.experts-exchange.com/Networking/Misc/Q_20519069.html
Dear All,
I have received the error message as below whenever I send the email to recepients who use one of the ISP Domain (Jaring). E.g: xxx@pd.jaring.my
Unable to deliver the message due ...
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_20589011...
Zones:
ExchangeDate Answered: 05/01/2004 Grade: A Views: 0
Ok I think I missed something on my 3550.
From the 3550 I can ping to the net and beyond no problem....
when I put a device into a VLAN port and I ensured its assigned to the correct vlan, ...
http://www.experts-exchange.com/Networking/Misc/Q_21890072.html
I wish to print to a HP LaserJet 4000TN from an NCR 3550 running SYSvr4. I have little or no doco. on this and about as much experience setting up lasers. Do I need to write a filter? or create an ...
http://www.experts-exchange.com/OS/Unix/Setup/Q_10041821.html
Zones:
Unix SetupDate Answered: 03/29/1998 Grade: C Views: 0
I am configuring a cisco 3550 switch with several vlans for my network. I would like to nat 1 of the fa ports to a different subnet since that port will host a connection to a trusted trading partn...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20817958.html
Zones:
RoutersDate Answered: 12/05/2003 Grade: A Views: 46
I have just been tasked to install a small "Internal only" domain test network. It will not be allowed to access the internet! Strictly internal!!! Purchased equipment:
Compaq ML 530 Server w/...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21158969.html
Zones:
RoutersDate Answered: 10/07/2004 Grade: A Views: 0
Hello folks,
I'm using a Cisco 3550 Layer 3 switch as the backbone router for our college. We have two major networks - Faculty [192.168.100.0/24] and Students/Labs [172.16.0.0/16]. There is also...
http://www.experts-exchange.com/Networking/Misc/Q_21238796.html
Hi all,
I am trying to use a cisco 3550 as a gateway for an network with three web and one e-mail server on the same internal subnet. There are two cisco 2600 with a t-1 connected to each and a ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21271388.html
Zones:
RoutersDate Answered: 01/17/2005 Grade: B Views: 0
I'm attempting to download the IOS on a catalyst 3550 but it won't let me. I heard that for a c3550 I will need the cisco tftp, is this true? Any tftp programs that worked with a catalyst 3550 IO...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21300357.html
Zones:
RoutersDate Answered: 02/04/2005 Grade: A Views: 4
Is the syntax on the 3550 L3 cisco switch pretty similar to other switches...like the 2950?
Is the syntax for setting up VLANs, duplex settings etc..all the same?
I think the 3550s come with 4 ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21335598.html
Zones:
RoutersDate Answered: 03/02/2005 Grade: A Views: 0
