Need a little help trying to get to the bottom of why my 3600 will not translate or resolve DNS queries for the local subnet. I will post a print of the config file and NAT stat. I have a 3600 w...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20400638.html
Zones:
RoutersDate Answered: 03/11/2003 Grade: A Views: 14
Can a Cisco 3600 router be programmed to route based on line condition? If so, how? Here is our situation...
Right now we are using one T1 circuit for all of our Internet traffic. Our Cisco 3600...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20607883.html
Zones:
RoutersDate Answered: 07/07/2003 Grade: A Views: 0
Hi i have a cisco 3600, but when i start it up iget this listing without the possibility to do nothing
any idea on what to do? it hangs on this screen!!!!
thanks
cisco boot:
System Boot...
http://www.experts-exchange.com/Networking/Misc/Q_21194236.html
Zones:
NetworkingDate Answered: 01/08/2005 Grade: A Views: 0
I have been trying to enable network address translation on router and I am having difficulties doing so. I have two ethernet interfaces configured with nat to the inside and one serial interface ...
http://www.experts-exchange.com/Networking/Misc/Q_20582364.html
I recently purchased a Firebox 500 to replace an outdated Lucent firewall. I think i have configured the Firebox identically to the Lucent but users that connect to our T-1 internet pipe through o...
http://www.experts-exchange.com/Networking/Misc/Q_21004396.html
ok I have a cisco 3600 with 4 csu/dsu in it. 3 offices are external and will be using the point to point t1 lines. There is 1 dedicated t1 installed in the office for internet access. So I have 1...
http://www.experts-exchange.com/Networking/Misc/Q_21127149.html
Can someone please guide me in setting up a 3600 series router to my broadband connection? Any help would be greatly appreciated.
Thanks,
Jitaray
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21303108.html
Zones:
RoutersDate Answered: 09/24/2005 Grade: A Views: 22
I'm new to posting, so bear with me...
I have a Cisco 3600 router outside my firewall with two T1 ethernet ports but only Ethernet 1 is used and is configured for connecting to our ISP. Ethern...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21681402.html
Zones:
RoutersDate Answered: 03/06/2006 Grade: A Views: 0
i have just got a T1 line brought in and when i change my sonicwall from the current DSL line to the Cisco 1700 i am not getting any resonses from the DNS servers. I hooked my laptop up to the cis...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21724755.html
I had a remote site with a cisco 1600 hooked up to a adtran tsu 120 external csu/dsu. this is connected through a t1 line to our main office which had a TSU 120 connected to a Cisco 3600. I am re...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22757748.html
Zones:
RoutersDate Answered: 08/24/2007 Grade: B Views: 0
